YZ-2T Resin Steering Replacement Kit Bell Crank Center Link Servo Mount Z2-200NTA by Yokomo  [Z2-200NTA]

Yokomo Z2-200NTA Bell crank/Center link/Servo mount/Servo horn for YZ-2T
Price:
CAD$21.41
Brand:
Yokomo
Model:
Z2-200NTA
GTIN:
0639342195503
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
Spares / Hop-ups - Yokomo - Off-Road Chassis Parts category
Write a review

Steering components for YZ-2T 1/10 2WD

This resin parts set supplies steering components tailored for 1/10 scale YZ-2T 2WD racing trucks. The kit combines the bell crank, center link, servo mount and servo horn into one replacement pack aimed at routine maintenance and setup changes on the track.

Fitment covers the YZ-2T family listed in the specifications, so racers and hobbyists can check compatibility before ordering. The resin construction keeps weight down and makes these parts practical as spares for quick swaps during practice or event days.

Installation notes: these pieces attach to the original YZ-2T chassis mounting points and are intended to use the stock hardware and servo interface. After fitting, confirm servo centring, horn orientation and bell crank movement before fully tightening fasteners to ensure consistent steering geometry.

Specifications

  • Item: Bell crank / Center link / Servo mount / Servo horn set
  • Material: Resin
  • Model Number: Z2-200NTA
  • Compatibility: B-YZ2T / B-YZ2DTM2 / B-YZ2CAL2 / B-YZ2DTM2S / B-YZ2DTM3 / B-YZ2CAL3

Use this set as a direct steering component replacement on YZ-2T series 1/10 2WD trucks to restore or refine steering geometry during repairs and setup work.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

How can I verify these parts fit my YZ-2T chassis?

Compare the listed compatibility codes against your chassis code and perform a dry fit using the original mounting points. If the chassis code matches one of the items in the compatibility list, fitment is expected.

Will the original screws and servo horn work with these resin parts?

These components are designed to accept the stock hardware and standard servo horn geometry, but inspect fasteners for wear and replace any damaged items before final assembly.

Is resin strong enough for regular club racing use?

Resin gives a lightweight spare option suitable for track use and setup work. It can handle normal loads but may be less impact resistant than metal parts, so consider carrying spares if you race aggressively.

What quick checks should I do after installing the steering set?

Centre the servo, confirm horn alignment and bell crank clearance, then set toe and steer throw. Only torque hardware once geometry checks are complete to avoid binding.

Copyright © 2008-2026 rcjaz.ca All rights reserved