YZ-2 Stock 67mm Bi-metal Dogbone Set for MIP Pucks - Yokomo Z2-18841  [Z2-18841]

Yokomo Z2-18841 MIP Pucks Bi-metal dogbone 67mm for YZ-2 Stock ver.
Price:
CAD$38.67
Brand:
Yokomo
Model:
Z2-18841
GTIN:
3888
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
Spares / Hop-ups - Yokomo - Off-Road Drive Train Parts category
Write a review

MIP Pucks Bi-metal Dogbone Parts

The Yokomo Z2-18841 is a pair of bi-metal universal dogbones made for the MIP Pucks drive system on YZ-2 Stock ver. chassis. These RC-scale replacement pieces arrive as two sets to cover both sides of the drivetrain and are designed to offer a balance of wear resistance and drivetrain feedback without changing chassis geometry.

Fitment and function are straightforward: the dogbones mate with MIP Pucks couplers and the stock differential outputs on supported YZ-2 Stock variants. Installation involves basic center-drive disassembly and aligning the pucks; no special adapters are listed as required. When replacing existing dogbones, inspect puck faces and retaining screws to ensure proper alignment and prevent accelerated wear on the bi-metal surfaces.

From a service perspective, the Z2-18841 components act as maintenance items rather than a major performance upgrade. Treat them as replaceable wear parts and check contact points regularly, especially after running on high-traction surfaces. These parts are intended for setups that retain the stock YZ-2 Stock driveline with MIP Pucks.

Specifications

  • Item: 2 sets of MIP Pucks bi-metal universal dogbones, 67mm
  • Material: Bi-metal
  • Model Number: Yokomo Z2-18841
  • Compatibility: B-YZ2DTM2S / B-YZ2DTM3 / B-YZ2CAL3 (YZ-2 Stock ver. with MIP Pucks)

Use these dogbones when restoring original MIP Pucks driveline function or replacing worn parts, and verify puck alignment and retaining hardware after installation to preserve drivetrain reliability.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

How do I install these into a YZ-2 Stock with MIP Pucks?

Remove the center drives to access the dogbone positions, use standard hex drivers to swap the old dogbones for the new Z2-18841 pieces, then check puck alignment and retaining screw torque before test running.

Do the sets replace both left and right sides?

Yes. The product is supplied as two sets so you can service both sides of the drivetrain without ordering additional individual pieces.

Are special tools required for the swap?

No special tools are necessary beyond common hobby hex drivers and a clean bench to inspect puck alignment and fasteners during installation.

Will these change the chassis geometry?

They are like-for-like replacements intended to maintain the original driveline geometry; any change in feel is usually subtle and linked to wear rather than the bi-metal material itself.

Copyright © 2008-2026 rcjaz.ca All rights reserved