YZ-2 DTM Compatible J Concept S2 Body Shell - Z2-DTMB by Yokomo  [Z2-DTMB]

Yokomo Z2-DTMB YZ-2 S2 Body by J Concept
Price:
CAD$25.83
Brand:
Yokomo
Model:
Z2-DTMB
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
Spares / Hop-ups - Yokomo - ROR-010 category
Write a review

J Concept S2 Shell Tailored for YZ-2 DTM

The Yokomo Z2-DTMB is the J Concept S2 body shell produced for 1/10 electric touring car chassis derived from the YZ-2 DTM line and the ROR-010 family. It ships with a window masking sheet to simplify painting and trimming, and its outer contours are made to match mounting points and wheel arches found on those chassis.

Fit and compatibility are the priority: the shell keeps standard cut lines so it mounts on supported frames with minimal modification, and the included masking sheet speeds paint preparation. Always verify body post spacing and ride height clearance before final trimming to ensure clearance around shocks and tyre sidewalls.

As an aerodynamic tool, the S2 profile alters airflow and balance. Small front splitter and rear overhang trims can sharpen turn-in or increase rear grip, and shifting mounting fore or aft changes yaw sensitivity. Trim symmetrically and use the supplied mask to protect window areas while painting.

Specifications

  • Item: J Concept S2 body shell
  • Material: Not specified
  • Model Number: Z2-DTMB
  • Compatibility: B-YZ2DTM, B-YZ2CAL2, B-YZ2DTMW, B-YZ2DTM2, B-YZ2DTM2S, B-YZ2DTM3, B-YZ2CAL3, B-YZ2DTM31, B-YZ2CAL31, ROR-010, ROR-010RTR, ROR-010RTR-1

Select this shell when you want a J Concept S2 silhouette that fits YZ-2 DTM based chassis and ROR-010 variants, with the included masking making paint and finishing quicker.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

What exactly arrives in the box?

The package contains the J Concept S2 body shell and a window masking sheet to help with paint preparation and clean trims.

Will it mount to a stock YZ-2 DTM without changes?

It is cut for YZ-2 DTM derived frames and will align with common mounting points, but check post spacing and perform minor trimming as needed for shocks and tyre clearance.

Can cutting or paint affect handling?

Painting does not change handling by itself, however trimming edges and choosing different mounting positions will influence aerodynamics and balance, so test changes gradually.

Is additional drilling required to fit?

Most fits use standard body post locations, though small alignment checks or trimming of holes may be necessary depending on your chassis setup and accessories.

Copyright © 2008-2026 rcjaz.ca All rights reserved