YR-X12 Front Upper A-arm Mount (Left) - YX-09L by Yokomo  [YX-09L]

Yokomo YX-09L Front Upper
Price:
CAD$5.15
Brand:
Yokomo
Model:
YX-09L
GTIN:
3888
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Left-side front upper for YR-X12 family

This machined aluminum front upper A-arm mount is made for 1/12 scale RC on-road competition and is intended for the left side of the chassis. It fits the Yokomo chassis YR-X12 and YR-X1219 and provides the attachment point where the upper A-arm connects to the suspension tower.

As an aluminum replacement upgrade, the part increases stiffness compared with common plastic mounts and is intended to produce predictable changes to suspension geometry and handling when used during setup tuning. Keep this component dedicated to 1/12 on-road competition cars to avoid mismatched applications.

Installation notes: confirm left-side orientation before fitting, remove the stock upper mount from the suspension tower using appropriate tools, transfer any required bushings or hardware from the original part, then fasten the Yokomo YX-09L in the factory screw locations. After installation, check suspension travel and steering throw to ensure there is no interference.

Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

How should I verify left-side orientation before fitting the mount?

Visually compare the new mount to the stock left-side part, confirm the screw hole pattern matches the suspension tower, and orient the arm pivot toward the chassis center before final tightening.

Can I reuse the original bushings and hardware?

Yes, transfer any necessary bushings or screws from the stock upper mount to the Yokomo YX-09L to preserve fitment and spacing.

Do I need to check suspension travel after installation?

Always verify full suspension travel and steering clearance after fitting to confirm there is no binding or contact that could affect handling.

Copyright © 2008-2026 rcjaz.ca All rights reserved