Yokomo YOKZCTB42 42mm Titanium Turnbuckle Pair  [YOKZCTB42]

Precision 42mm titanium turnbuckle

This aftermarket 42mm turnbuckle is an R/C linkage component made for tie-rod and suspension connections where a 42mm length is required. Supplied as a pair, the parts are precision machined from titanium to lower weight and resist corrosion compared with heavier metals used in some stock linkages.

Fitting is straightforward for users familiar with turnbuckles: remove the existing linkage, hand-start the threads to avoid cross-threading, set the overall length to dial in toe or camber, then secure the rod ends using appropriate thread-locking practices for your model. Avoid excessive torque on the rod ends to preserve thread life and ball stud seating.

Small adjustments at the turnbuckle directly change steering and suspension geometry. Use these titanium turnbuckles when you need fine, repeatable setup tweaks for 1/10 scale touring cars or buggies, and always check full travel to prevent binding with steering or suspension movement.