The Yokomo YOKYS2DLH is a 2mm long shock spring designed for drift RC setups, finished in green and produced by Swift. It offers a simple tuning route to change suspension response by altering spring rate and preload without requiring changes to shock oil or piston setup.
Fit these springs as replacements or tuning alternatives on compatible drift shock assemblies. Swapping springs is an effective way to fine-tune how quickly a car rolls into and recovers from slides; softer springs increase body roll and help absorb weight transfer, while stiffer springs reduce roll and speed up recovery.
Installation follows standard shock service procedures: remove the shock from the car, disassemble the cap and shaft as needed for your shock, slide the spring onto the shock body or onto the shaft retainer, then reassemble. Check spring retainer and end cap clearance before reinstalling. Always test adjustments on a safe surface and re-balance other suspension settings as required.
Compatibility notes: this item is intended for drift use and functions as an aftermarket spring option. Confirm fitment with your shock length and retainer style before purchase since spring seat height and inner diameter vary by shock maker.
Copyright © 2008-2026 rcjaz.ca All rights reserved