Yokomo Y2-003ZAFA Front Bulkhead to Upper Deck Aluminum Adapter for DP/RDR Series  [Y2-003ZAFA]

Yokomo Y2-003ZAFA jp
Price:
CAD$15.89
Brand:
Yokomo
Model:
Y2-003ZAFA
GTIN:
639342211845
Condition:
Brand New
Write a review

Bulkhead-to-upper-deck aluminum adapter

This aluminum adapter creates a solid connection between the front bulkhead and the upper deck on compatible 1/10-scale touring and drift chassis. It can be used as a direct replacement or as an alternative mounting piece to change the upper deck position relative to the front bulkhead while remaining an OEM-style accessory for RC builds.

Installation is straightforward for anyone familiar with small-scale chassis work: remove the existing fasteners at the front bulkhead and the upper deck mounting points, align the adapter to the mating surfaces, and secure it using the original screws. Check alignment before final tightening to prevent binding in the suspension and steering linkages.

From a setup perspective this adapter changes the deck height and the local stiffness between front bulkhead and upper deck, which can modify chassis flex behavior. Use it when testing deck height, adjusting mounting geometry, or replacing a damaged OEM bracket, and always verify clearance for servo and steering linkages after fitting.

Compatibility

  • DP-GR86
  • DP-GR86G
  • DP-GR86W
  • DP-GRA90
  • DP-GRA90R
  • DP-GRA90W
  • DP-YD2Z
  • DP-YD2ZG
  • DP-YD2ZS
  • RDR-010
  • RDR-010-1
  • RDR-010G
  • RDR-010G-1
  • RDR-020
  • RDR-020G
  • SDR-010
  • SDR-010LTS
  • DP-RZ34
  • DP-RZ34BL
  • DP-RZ34R
  • DP-MS15
  • DP-JZXBN
  • DP-MS15BL
  • DP-RS13SP
  • DP-FCBN
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Will this mount directly to DP-RS13SP front bulkhead mounting points?

Yes. DP-RS13SP is included in the compatibility list and the adapter is designed to use the existing front bulkhead and upper deck screw locations for a direct fit.

Do I need new screws or hardware to fit it?

In most cases no extra hardware is required; reuse the chassis original screws. Confirm thread engagement and alignment are correct before final torque.

How can I avoid steering bind after installation?

Check that the adapter does not push the upper deck into the servo or steering arms, and tighten fasteners incrementally while verifying full steering travel to prevent binding.

Copyright © 2008-2026 rcjaz.ca All rights reserved