Yokomo RP-083PI RP Ultra Front Off-road Spring (Pink) for Carpet/Astro Turf  [RP-083PI]

Yokomo RP-083PI RP Ultra Front Off-road Spring (Pink) for Carpet/Astro turf
Price:
CAD$10.63
Brand:
Yokomo
Model:
RP-083PI
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
Spares / Hop-ups - Yokomo - ROR-010 category
Write a review
alt="Yokomo RP-083PI RP Ultra Front Off-road Spring (Pink) for Carpet/Astro turf" title="Yokomo RP-083PI RP Ultra Front Off-road Spring (Pink) for Carpet/Astro turf"

Precision front spring for high-grip tracks

The Yokomo RP-083PI is an RP Ultra front off-road spring sized and finished specifically for carpet and astro turf use. Its design targets high mechanical grip conditions where steady rebound and controlled landings are more critical than on loose surfaces, and production improvements aim to reduce fatigue and inconsistency seen in earlier batches while keeping a nimble response.

On the track the spring changes front-end behaviour during jumps and gap work, improving landing stability and helping the chassis track more predictably through transitions. Drivers tune preload and pair the spring with appropriate rear rates to achieve the desired front compliance and handling balance on indoor layouts.

Fitment note: this component is a front suspension spring for the supported chassis listed below. Confirm spring seat and retainer compatibility with your model before fitting.

Supported Chassis: B-YZ4SF / B-YZ2 / B-YZ2CA / B-YZ2DT / B-YZ2DTM / B-YZ2DTMW / B-YZ2DTM2 / B-YZ2CAL2 / B-YZ2DTM2S / B-YZ2DTM3 / B-YZ2CAL3 / B-YZ2DTM31 / B-YZ2CAL31 / ROR-010 / ROR-010RTR / ROR-010RTR-1

Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.
Measure your car's spring seat diameter and retainer height, then compare to the spring coils and length. If dimensions match the supported chassis list above, the spring should install without modification.
Often yes, but confirm the spring seat and cap clearance. If the seat profile differs, you may need a compatible retainer or a small spacer to ensure proper preload and alignment.
Start with light preload, run a few laps to assess rebound, then add preload in small steps to control landing dive. Pair with a slightly firmer rear spring to keep the chassis balanced on high-grip surfaces.

Copyright © 2008-2026 rcjaz.ca All rights reserved