RC gear differential silicone oil #10000 for Yokomo RP-08510KA Racing Performer Ultra  [RP-08510KA]

Yokomo RP-08510KA Racing Performer Ultra diff oil #10000
Price:
CAD$17.89
Brand:
Yokomo
Model:
RP-08510KA
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Thick silicone diff fluid for heavy drive loads

This Racing Performer Ultra diff oil is an RC-scale gear differential fluid formulated to support higher drivetrain loads that come with modern LiPo batteries and brushless motors. The #10000 grade provides a high-viscosity silicone base intended to stabilize internal damping so the differential maintains predictable behavior under sustained stress.

In practical use the oil's role is to control torque transfer between wheels, smoothing engagement during acceleration and balancing slip through cornering. A heavier silicone fluid such as this reduces abrupt changes in diff action, helping maintain traction feel from the opening laps through longer runs.

Service guidance: when replacing differential oil, fully drain the old fluid, clean the internal gears and housing, inspect seals and bearings for wear, then refill to the manufacturer recommended level and reassemble. After refilling, run a few moderate laps to allow the oil to distribute and settle before returning to full competition pace.

Tuning note: swapping to a higher-number diff oil like #10000 increases coupling between axle outputs and can reduce spin under power, so adjust driving technique and suspension settings accordingly to retain desired handling balance.

Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.
Higher-viscosity oil like #10000 increases internal coupling, which smooths torque transfer and gives more predictable traction during acceleration and heavy load. Expect less sudden spin and a steadier drive feel.
Drain the old fluid completely, wipe gears and housing clean, check seals and bearings for damage, then refill to the specified level and reassemble. Run a few short sessions to let the oil bed in before heavy use.
Yes, a thicker oil increases diff lock effect which can reduce inside-wheel spin and alter turn-in and exit balance. You may need to soften suspension or tweak driving inputs to retain your preferred handling.

Copyright © 2008-2026 rcjaz.ca All rights reserved