Yokomo R12-10LIS Anodized Aluminum M5x8 Set Screw for R12/GT series  [R12-10LIS]

Yokomo R12-10LIS Aluminum M5X8 Set Screws for R12/GT series
Price:
CAD$3.31
Brand:
Yokomo
Model:
R12-10LIS
GTIN:
3888
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
Spares / Hop-ups - Yokomo - R12 category
Write a review

Anodized M5x8 ride-height adjustment screw for R12/GT

This M5x8 anodized aluminum set screw is made as a direct replacement for the spring-tension (ride-height) adjustment screw used when fitting inner-spring lower arms on Yokomo R12 and GT series 1/10 scale chassis. It provides a lighter anodized-aluminum option while keeping thread profile and mounting position identical to the original part.

Installation is simple: thread the screw into the existing adjustment hole on the lower arm, check for smooth engagement and the correct spring preload, then verify full suspension travel and clearance. The screw is intended to set ride height and spring preload during suspension tuning and does not alter spring rate or damper settings.

Choose this part when converting to inner-spring lower arms or when a lighter replacement is needed for consistent ride-height adjustments during setup and maintenance.

Compatible Models

  • GT5-R2
  • GT5-RS2
  • YR-R12C3
  • YR-R12C31
  • GT5-R35
  • GT5-SC430
  • GT3-REA
  • GT3-IS350
  • GT3-B4
  • GT3-CAX
  • GT3-BRZ
  • GT3-AHP
  • GT-B
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

How does this screw affect ride height?

It provides the adjustment point for setting ride height and spring preload when using inner-spring lower arms on R12/GT chassis; turning the screw changes preload but does not change spring rate.

Will it fit the stock adjustment hole?

Yes. Threads and mounting dimensions are intended to match the original adjustment screw for direct replacement.

Any tips for installation?

Thread the screw in until the desired preload is reached, check full suspension movement for clearance, and recheck after a short run to confirm settings.

Copyright © 2008-2026 rcjaz.ca All rights reserved