Yokomo SP-WRMS Mon-Teck Racer Type Wing (0.75mm Medium) 1/10 On-Road Touring  [SP-WRMS]

Price:
CAD$6.67
Brand:
Yokomo
Model:
SP-WRMS
GTIN:
11
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Mon-Teck Racer Type 0.75mm Wing Overview

This Mon-Teck Racer Type wing supplied under the Yokomo SP-WRMS designation is a 0.75mm medium-thickness polycarbonate rear wing produced by Montec in Italy and intended for 1/10 on-road touring use.

Made from slightly thinner polycarbonate, the wing lowers absolute peak downforce compared with stiffer sections while improving rotation and responsiveness through tight turns. That balance makes it a practical choice for technical layouts and high-grip surfaces, and for stock-class driving where turn-in and mid-corner balance are priorities.

When fitting the wing, use the car's standard rear wing posts and original mounting hardware; confirm alignment and trim the trailing edge as needed to match your chassis' mounting pattern. The part is supplied as an RC-scale touring car wing and is intended to replace or fine-tune the rear aerodynamic balance on compatible 1/10 touring chassis.

Compatibility

  • MRTC-BD919
  • MRTC-BD919S
  • MRTC-BD10
  • MRTC-BD10A
  • MRTC-BD10LC
  • MRTC-BD10LCA
  • MRTC-BD10LCR
  • MRTC-BD10LCRA
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

How should I mount the wing to my touring car?

Fit the wing using your vehicle's standard rear wing posts and the stock hardware. Start with the factory mounting holes, then check symmetry and tweak alignment before final tightening.

Do I need to trim this 0.75mm wing to fit different bodies?

It may require minor trimming to match specific body contours or mount patterns. Trim small amounts and test handling before removing more material.

Are extra brackets or adapters required?

In most cases no. The wing is designed to use standard rear posts; only aftermarket adapters are needed if your chassis uses a nonstandard mounting footprint.

Copyright © 2008-2026 rcjaz.ca All rights reserved