BD9 Lower Bulkhead (A) Front Left / Rear Right - B9-32LA19A by Yokomo  [B9-32LA19A]

Yokomo B9-32LA19A Lower Bulkhead (A)(F Left/R Right) for BD9
Price:
CAD$43.32
Brand:
Yokomo
Model:
B9-32LA19A
GTIN:
0639342204472
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
Spares / Hop-ups - Yokomo - MRTC-BD10FF category
Write a review

Installation Guide: Lower Bulkhead (A) for BD9

This lower bulkhead (A) fits the BD9 chassis family and is intended for the front left or rear right position. It is supplied as a single replacement piece suitable for routine maintenance or part swaps on BD9-based cars.

During installation, pay attention to orientation and mounting holes to preserve suspension geometry and drivetrain clearance. Reuse original fasteners where possible and confirm correct side before final tightening to avoid handling changes.

Specifications

  • Item: Lower Bulkhead (A), front left / rear right, 1 pcs
  • Material: Not specified
  • Model Number: B9-32LA19A
  • Compatibility: MRTC-BD919, MRTC-BD919S, MRTC-BD10, MRTC-BD10A, MRTC-BD10FF, MRTC-BD10LC, MRTC-BD10LCA, MRTC-BD10LCR, MRTC-BD10LCRA

Compatible Models

  • MRTC-BD919
  • MRTC-BD919S
  • MRTC-BD10
  • MRTC-BD10A
  • MRTC-BD10FF
  • MRTC-BD10LC
  • MRTC-BD10LCA
  • MRTC-BD10LCR
  • MRTC-BD10LCRA

Yokomo lower bulkhead (A) replacement part for BD9-series cars, supplied to restore correct mounting points and maintain suspension and drivetrain alignment during repair or service.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

How do I confirm left or right orientation before fitting?

Compare the replacement to the removed part and the chassis reference points. The mounting hole pattern and drive clearance will indicate front left versus rear right orientation.

Will I need to modify other parts to install it?

For compatible BD9 models no modifications are normally required. Install using the original hardware and verify fit before final assembly.

How many pieces are included and where does it mount?

The package contains one lower bulkhead (A), designed for use at either the front left or rear right mounting position.

Any tips to avoid alignment issues after replacement?

Hand-thread fasteners first, check drivetrain clearance, and torque evenly. Run a quick alignment check on the suspension before full test driving.

Copyright © 2008-2026 rcjaz.ca All rights reserved