Yokomo B10-008RGA Graphite Rear Lower Arm for BD10  [B10-008RGA]

Yokomo B10-008RGA Graphite molded rear lower suspension arm (57mm-Shock42mm) for BD10
Price:
CAD$18.42
Brand:
Yokomo
Model:
B10-008RGA
GTIN:
0639342202379
Condition:
Brand New
Write a review

Graphite Rear Lower Arm tuned for BD10 handling

The Yokomo B10-008RGA is a precision rear lower suspension arm made for the BD10 chassis. Machined from robust graphite, this arm provides greater stiffness than stock arms to sharpen handling and vehicle response on corner entry and mid corner. The arm retains the factory geometry with a 57mm distance between suspension pins and a 42mm spacing from the inner suspension pin to the shock pivot to maintain predictable setup changes.

Compatible Models

  • MRTC-BD10
  • MRTC-BD10A
  • MRTC-BD10FF
  • MRTC-BD10LC
  • MRTC-BD10LCA
  • MRTC-BD10LCR
  • MRTC-BD10LCRA
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

How does graphite affect rear grip and steering?

Graphite increases torsional stiffness in the rear, which tends to quicken turn-in and make the car feel more responsive, especially on high traction surfaces.

Will this fit all BD10 revisions?

Yes, it is compatible with the BD10 variants listed in the compatibility section; verify mounting hardware if your chassis has aftermarket modifications.

Any setup notes when switching to graphite arms?

Expect a firmer rear feel; you may need to soften rear springs or adjust antiroll settings. Keep the 57mm and 42mm measurements in mind when tuning roll centre and shock angle.

Copyright © 2008-2025 rcjaz.ca All rights reserved