BD7/BD5 Front Body Mount Upgrade - Yokomo BD-016FS  [BD-016FS]

Front body post stabilizer

The Yokomo BD-016FS is an RC-scale front body mount support engineered to cut play at the front body posts on BD7 and BD5 models. It stabilizes the body mounting area so body flex and vibration do not translate into inconsistent aero balance and handling feedback during fine on-road setup work.

Constructed with a carbon main post and supplied aluminum collars, the BD-016FS installs into the existing body post stack and uses standard mounting hardware. It maintains the original mounting geometry while providing a firmer interface between the body post and chassis to reduce unwanted movement.

Installation is straightforward: remove the stock front body post, pass the BD-016FS post through the body shell, and position the included aluminum collars to set clamping height before securing with standard nuts or clips. After fitting, check steering clearance at extremes and re-tune body mount height as part of your track validation.