YZ-4SF Center Universal Bone 63.5mm Aluminum - Yokomo S4-010A63A [S4-010A63A]

Yokomo S4-010A63A Aluminum 63.5mm Center universal bone (70-75 Hard) for YZ-4SF

Price:

CAD$13.38

Brand:

Yokomo

Model:

S4-010A63A

GTIN:

0639342187744

Not Available

Please kindly input your name and email address, we will inform you once we have the restocking.

Or you may find similar product under the
Spares / Hop-ups - Yokomo - YZ-4 category

Write a review

Description
FAQ

Overview of the centre universal bone for YZ-4SF

This 63.5mm centre universal bone is intended for the front side of the centre drive on the YZ-4SF chassis. Made from aluminium with a 70-75 hardness rating, the part is offered as a lighter alternative to standard steel components for RC scale use. Its purpose is concentrated on the centre drive path where reduced rotating mass can influence throttle response and running time.

The component is supplied as a single item. When replacing the original centre link, confirm fitment on the YZ-4SF and inspect mating interfaces for correct clearance and engagement. The design aims to balance durability with reduced inertia rather than serving as structural reinforcement beyond typical RC upgrade expectations.

Packing includes

Includes 1 item

Compatible Models

B-YZ4SF

Remark :

Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

How do I install this on a YZ-4SF centre drive?

Remove the original centre link and verify the orientation for the front side of the centre drive. Fit the 63.5mm aluminium piece, check engagement with mating splines or interfaces, and confirm there is sufficient clearance before running the vehicle.

Will I need special fasteners to fit it?

Most installations use the existing hardware from the original centre link. Inspect the original fasteners and replace any that are worn, but special or proprietary bolts are not normally required.

Does this change drive geometry or setup?

The part primarily reduces rotating mass and should not alter centre drive geometry significantly. Still, check for any new vibration or binding and confirm proper engagement after installation.