Yokomo B7-SS10A 1.0mm Aluminum Suspension Shim for BD7  [B7-SS10A]

Yokomo B7-SS10A 1.0mm Aluminum Sus-mount spacer for BD7
Price:
CAD$20.41
Brand:
Yokomo
Model:
B7-SS10A
GTIN:
0639342204052
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
Spares / Hop-ups - Yokomo - BD7 category
Write a review

Quick Setup with Yokomo B7-SS10A Spacer

Upgrade your setup routine with the Yokomo B7-SS10A 1.0mm aluminum suspension mount spacer made for the BD7 family. The spacer is built to let you alter ride height rapidly without taking off suspension mounts or undoing screws, so you can fine tune handling between runs.

Design That Speeds Setup

The Yokomo B7-SS10A spacer is supplied in two integrated styles for FF and RR positions plus four separate types for FR and RF orientations. That arrangement makes it straightforward to raise suspension mounts quickly for rapid setup changes during practice or race day.

Model Fitment and Compatibility

Suitable Models

  • MRTC-BD919
  • MRTC-BD919S
  • MRTC-BD10
  • MRTC-BD10A
  • MRTC-BD10FF
  • MRTC-BD10LC
  • MRTC-BD10LCA
  • MRTC-BD10LCR
  • MRTC-BD10LCRA
  • MRTC-BD11-1
  • MSR-BD11
  • MRTC-BD11US
  • MRTC-BD11A-1
  • MSR-010FE
  • MSR-010FEA
  • MSR-BD12
  • MSR-BD12A
  • MSR-BDFWD
  • MDR-020
  • MDR-020BL
  • MDR-020P
  • MDR-020R
  • MRTC-BD715B
  • MRTC-BD715O
  • MRTC-BD715S
  • MRTC-BD716
  • MRTC-BD716H
  • MRTC-BD716O
  • MRTC-BD716S
  • MRTC-BD7RS3S
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

How do I install the spacer without removing the mount?

The spacer slips between the mount and chassis or stack in the mount area depending on orientation; no full disassembly is required, so you can change shims quickly trackside.

Which spacer type should I use for front and rear?

Use the integrated two-type pieces for FF and RR positions and select one of the four FR/RF pieces for the mixed corners to achieve the desired lift and roll characteristics.

Will this affect camber or toe when fitted?

Small ride-height changes will slightly alter static camber and toe; check alignment after fitting and make minor adjustments as needed for consistent handling.

Copyright © 2008-2025 rcjaz.ca All rights reserved