YD-2 Front Bulk Head and Upper Arm Mount - Y2-302MRA by Yokomo  [Y2-302MRA]

Yokomo Y2-302MRA Front bulk head/Upper arm holder for YD-2
Price:
CAD$13.77
Brand:
Yokomo
Model:
Y2-302MRA
GTIN:
0639342213030
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
Spares / Hop-ups - Yokomo - YD-2 category
Write a review

Front bulk head and upper arm mount

The Yokomo Y2-302MRA is a direct replacement front bulk head and upper arm holder engineered for RC-scale YD-2 drift chassis. It locates the front bulk assembly and secures the upper suspension arm, so correct seating and alignment are essential when exchanging or upgrading components.

Compatibility covers the YD-2 family listed by Yokomo, including DP-YD2, DP-YD2G, DP-YD2PLS, MRTC-YD2, MRTC-YD2CK, DP-YD2ES, and DP-YD2EX. Confirm your chassis code before buying to ensure a bolt-on fit without modification.

Installation notes: remove the factory bulk head, position the Y2-302MRA into the chassis locating points, align the upper arm pins and tighten the mounting screws so the arm pivots freely without binding. After installation, recheck steering geometry and wheel alignment since small positional changes at the bulk head influence front toe and camber.

Tuning impact: this holder influences front-end stiffness and steering feedback for the YD-2 platform, so racers and hobbyists swap it to restore factory geometry after repairs or to refine roll center and steering feel for drifting sessions.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

How can I verify this fits my YD-2 variant?

Check the chassis code stamped on your YD-2 or consult your build sheet. The Y2-302MRA is compatible with the listed DP-YD2 and MRTC-YD2 variants only.

Will replacing the bulk head alter steering alignment?

Yes, small shifts in bulk head position affect toe and camber. After fitting the part, verify and adjust steering geometry as part of your setup routine.

Is the Y2-302MRA a standard replacement part?

Yes. The Y2-302MRA is manufactured as an RC-scale replacement to match YD-2 series front bulk and upper arm mounting points.

Copyright © 2008-2026 rcjaz.ca All rights reserved