XRAY X4F'25 Front Upper Deck Graphite 2.0 - Factory Pro O-XCP022  [FP-O-XCP022]

X4F'25 front upper deck overview

This Factory Pro O-XCP022 front upper deck is an aftermarket, direct-fit replacement for the XRAY X4F'25 chassis, manufactured as a 2.0mm graphite plate for the front upper area. As a top deck component it changes how stiffness is distributed through the front of the car and is aimed at racers tuning initial turn-in and front balance.

Fitting requires careful alignment with the existing mounting points on the X4F'25 chassis so that screw holes line up and the deck sits flush without obstructing suspension travel. After installation, verify clearances around the servo, steering linkages and nearby components to avoid binding. This part is intended to swap in place of the original upper deck to alter front chassis characteristics.

On-track setup advice: fitting a graphite 2.0 plate usually raises local front stiffness, which can produce crisper turn-in and altered steering feedback. Make small changes and run a few laps between adjustments to understand how this deck interacts with your shocks and tyre pressures.