XRAY T4'20 Graphite Upper Deck 2.25MM - Arrowmax AM-T4-301060-V2  [AM-T4-301060-V2]

Arrowmax AM-T4-301060-V2 T4\'20 Graphite Upper Deck 2.25MM
Price:
CAD$29.88
Brand:
Arrowmax
Model:
AM-T4-301060-V2
Condition:
Brand New
Write a review

Upper Deck Upgrade for XRAY T4'20

The Arrowmax AM-T4-301060-V2 is a 2.25mm graphite upper deck made for the XRAY T4'20 chassis. It functions as a direct replacement plate that changes overall chassis stiffness while providing a stable mounting surface for electronics and common hop-ups.

Constructed from graphite, this plate is aimed at competitive drivers and tuners who use chassis flex to tune steering behaviour and traction. It installs using the stock T4'20 upper-deck mounting points and generally replaces the original plate without needing special fasteners.

Use the deck as a tuning variable: increasing upper-deck stiffness shifts front to rear flex characteristics, so try changes alongside tyre selection and suspension settings to reach the handling you want.

Specifications

  • Item: Arrowmax AM-T4-301060-V2 T4'20 Graphite Upper Deck 2.25MM
  • Material: Graphite
  • Model Number: AM-T4-301060-V2
  • Compatibility: XRAY T4'20

Treat this deck as part of an iterative setup process: test on-track, then refine suspension and tyre choices to suit the altered chassis response.

Will this plate work on earlier or later T4 versions?

This specific part is specified for the XRAY T4'20 layout; mounting patterns vary by year so confirm hole positions before assuming fit on other model years.

Do I need different screws to fit it?

The deck is designed to use the T4'20's existing upper-deck hardware and standard screws in most installs, so extra proprietary fasteners are usually not required.

How will 2.25mm graphite change handling?

A thicker graphite plate reduces chassis flex, which typically sharpens steering response and changes traction feel; expect shifts in front/rear balance that need matching suspension and tyre setup.

Can I trim or drill the graphite safely?

Graphite can be modified with care using proper cutting tools and slow feeds to avoid chipping; dry-fit parts frequently and finish edges gently before final assembly.

Copyright © 2008-2026 rcjaz.ca All rights reserved