Xray T4 FWD Chassis Plate 7075 2.0mm - Arrowmax AM-920012  [AM-920012]

Arrowmax AM-920012 AM Medius Xray T4 FWD Chassis 7075 2.0mm MM
Price:
CAD$132.84
Brand:
Arrowmax
Model:
AM-920012
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Medius FWD plate tailored to Xray T4 setups

This AM-920012 Medius plate is an aftermarket front-wheel-drive (FWD) replacement component for Xray T4 touring car projects. CNC machined from 7075 aluminium at a nominal 2.0mm thickness, it forms part of the car's lower platform and is used when adjusting chassis stiffness and balance during setup sessions.

The text below concentrates on straightforward fitment, installation pointers, and the practical ways this plate will affect setup adjustments on the circuit. No special adapters or extra parts are assumed beyond normal T4 assembly items.

Installation notes: double-check your existing T4 mounting holes and spacer stack before fitting, torque aluminium-suitable hex screws to recommended values to prevent damage, and verify clearance around servo, ESC, and motor assemblies typical to T4 layouts.

Specifications

  • Item: AM Medius Xray T4 FWD Chassis
  • Material: 7075 aluminum
  • Model Number: AM-920012
  • Compatibility: Xray T4 FWD

Choose this 7075 2.0mm chassis plate when you need a direct-fit aluminium alternative for T4 front-drive builds and want a controlled approach to tweaking chassis rigidity and handling.

Will this plate drop straight into a standard Xray T4 without modifications?

It is intended as a direct-fit aftermarket plate for Xray T4 FWD layouts. Still, confirm your chassis hole alignment and spacer stack on the bench before final assembly to avoid surprises.

Does the AM-920012 use 7075 aluminium at 2.0mm thickness?

Yes. The AM-920012 is machined from 7075 aluminium with a nominal 2.0mm thickness, making it stiffer than typical thinner plates used for fine tuning.

Should I change screws or spacers when installing this aluminium plate?

Most stock T4 hardware will fit, but check screw engagement depth and spacer thickness. Use the correct torque for aluminium parts to prevent thread stripping or distortion.

How will a 2.0mm 7075 plate change on-track behaviour?

A thicker 7075 plate typically raises chassis stiffness, which can affect turn-in and mid-corner feel. Introduce changes gradually and compare lap times and handling feedback to tune appropriately.

Copyright © 2008-2026 rcjaz.ca All rights reserved