XRAY 363353-G Graphite Composite Rear Upright - Precision Stability  [XR-363353-G]

XRAY 363353-G Composite Upright Rear - Graphite
Price:
CAD$18.46
Brand:
XRAY
Model:
XR-363353-G
Condition:
Brand New
Write a review
alt="XRAY 363353-G Composite Upright Rear - Graphite" title="XRAY 363353-G Composite Upright Rear - Graphite"

XRAY Graphite Rear Upright Overview

Made from a specialised graphite composite, the XRAY 363353-G Composite Rear Upright is built to provide dependable stability and sharpened handling for RC racers. Suited for left and right installation, these uprights excel in high-traction setups to help maintain balance and increase cornering speed.

Roll Center Tuning

The rear uprights feature a two-tier roll center layout with a fixed lower position and an upper mounting point offering three selectable settings. This lets you dial in roll behaviour to match different track grip and driving styles.

Bearing Setup

To keep the drivetrain running smoothly, the design uses larger 5x12mm ball bearings in the outer location to cope with higher loads, while the inner position uses smaller 5x10mm bearings to reduce unsprung mass and improve responsiveness.

Composite Strength and Toe Design

Despite a compact profile, the uprights are reinforced by a tuned composite blend for strong impact resistance without altering suspension geometry, and the 0 degree toe layout preserves predictable rear behaviour under load.
Remark :
Due to limited stock availability, please notice that some XRAY items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Which RC cars are compatible with the XRAY 363353-G rear upright?

These uprights are intended for high-performance RC cars that use similar rear mounting geometry and benefit from high-traction setup tuning. Check your car's mounting points and bearing sizes for a fit.

How do the adjustable roll center positions affect handling?

Lower roll center tends to increase body roll and traction transfer, while the higher upper positions reduce roll and sharpen turn-in. Use the three upper settings to tune balance for corner speed or mid-corner grip.

What maintenance should I perform on these uprights?

Inspect for cracks after heavy impacts, clean bearing seats, and service the 5x12mm and 5x10mm bearings regularly with light oil or grease to maintain smooth operation and extend life.

Copyright © 2008-2025 rcjaz.ca All rights reserved