XB2 2026 1.2mm Steel Chassis Plate - 321128 by XRAY  [XR-321128]

XRAY 321128 - XB2 26 Chassis 1.2mm - Hudy Spring Steel
Price:
CAD$219.17
Brand:
XRAY
Model:
XR-321128
Condition:
Brand New
Write a review
alt="XRAY 321128 - XB2 26 Chassis 1.2mm - Hudy Spring Steel" title="XRAY 321128 - XB2 26 Chassis 1.2mm - Hudy Spring Steel"

1.2mm Hudy Spring Steel chassis for XB2 2026

This is an RC-scale steel replacement chassis engineered for the XB2 2026 platform, manufactured from Hudy Spring Steel. At 1.2mm thickness the plate adds mass low in the chassis, which shifts the centre of gravity downward and increases platform stability on typical touring car race surfaces.

In practical tuning terms the additional weight and rigidity reduce traction rolling tendencies on medium to high grip layouts, delivering more consistent handling through changing track conditions. The chassis is intended as a bolt-in component to replace the original chassis plate without additional fabrication.

Installation is a direct swap on XB2 2026-compatible builds using existing mounting points and hardware, so no special tools are required beyond standard workshop items. According to the manufacturer, no setup changes are required after fitting, though drivers may fine-tune ride height or spring rates to suit personal preferences or specific track surfaces.

Specifications

  • Item: Chassis plate 1.2mm
  • Material: Hudy Spring Steel
  • Model Number: 321128
  • Compatibility: XB2 2026

Use this 1.2mm Hudy Spring Steel chassis to alter weight distribution and reduce traction roll for XB2 2026 scale setups where increased low-end stability is desired.
Remark :
Due to limited stock availability, please notice that some XRAY items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Will this chassis fit my XB2 2026 kit without modification?

This plate is made for XB2 2026 compatibility and is designed as a direct bolt-in replacement using the stock mounting points, so no chassis modification is normally needed.

How does the 1.2mm steel plate affect handling on track?

Adding the 1.2mm plate shifts mass lower and increases torsional stiffness, which typically reduces traction roll and improves mid-corner stability on medium to high grip surfaces.

Will I need to change my setup after installing this chassis?

No mandatory setup changes are required, but drivers often adjust ride height or spring rates slightly to fine-tune balance for their driving style and specific track conditions.

Any care or maintenance needed for Hudy Spring Steel?

Inspect the plate after heavy impacts for bends or deformation, keep mounting surfaces clean, and replace the part if alignment or mounting integrity is compromised.

Copyright © 2008-2026 rcjaz.ca All rights reserved