X26 Front Lower Wishbone Replacement Serpent 402171  [SER402171]

Lower front wishbone for X26 chassis

This is the Serpent 402171 lower front wishbone designed for the X26 family, offered as a direct replacement part for the front suspension. It functions as the lower control arm that locates the front wheel hub, transfers suspension loads, and affects camber and roll behavior on electric on-road models.

Fitment is specific to X26-series layouts and matching Serpent assemblies; verify chassis and part references before fitment. The part is intended to mate with the original hub carriers, ball studs, and hardware used on X26 front-ends.

Installation notes: position the wishbone so witness marks or reinforced ribs line up with chassis mounting points, fully seat the ball stud socket, and tighten fasteners to the original thread engagement. After installation, check symmetric geometry left and right and re-check wheel alignment at ride height.

Tuning role: the lower wishbone influences camber change through suspension travel, roll center height, and initial steering response. Changing this arm can modify front-end stiffness and driver feedback when combined with different anti-roll bar rates, damper settings, or toe adjustments.