Works'91 TeamSpec Graphite Bellcrank Support (2.0mm) for Yokomo YZ-202G  [YZ-202G]

Yokomo YZ-202G Graphite Bellcrank Support (2.0mm) for Works\\\'91 TeamSpec
Price:
CAD$18.41
Brand:
Yokomo
Model:
YZ-202G
GTIN:
3888
Condition:
Brand New
Quantity Discount
Unit Price You Save
2 $29.59 each $-22.37 or -61%
3+ $25.56 each $-21.44 or -39%
Write a review

Reinforced graphite bellcrank for Works'91 TeamSpec

The Yokomo YZ-202G is an RC-scale graphite bellcrank support crafted to sit between the front bulkhead and the upper deck to lock the upper section of the steering post in place. Its 2.0mm graphite construction cuts down pivot flex, giving a sharper steering feel and steadier behaviour during corner entry.

Installation places the plate over the steering post upper journal where it is clamped by the stock chassis hardware, so no extra fasteners are required. This component acts as a structural brace inside the steering assembly, so handling changes come from increased front-end stiffness rather than altered steering geometry.

During setup, fit the plate and drive with your usual tyre and toe settings first, then make small, measured suspension or steering tweaks to assess its effect on turn-in and mid-corner balance.

Specifications

  • Item: Graphite Bellcrank Support (2.0mm)
  • Material: Graphite
  • Model Number: YZ-202G
  • Compatibility: YZ-W91TS, YZ-W91

Compatible Models

  • YZ-W91TS
  • YZ-W91

This support suits drivers wanting a firmer steering assembly on YZ-W91 series chassis, enabling finer tuning of steering responsiveness without modifying the core geometry.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Which Works'91 chassis will accept this plate?

This part is compatible with YZ-W91TS and YZ-W91 chassis as listed in the specifications. Check your chassis layout matches the steering post arrangement shown before fitting.

How do I fit the plate to the front end?

Fit the plate above the steering post upper journal and secure it using the existing front bulkhead to upper deck fasteners; no additional parts are required for the clamp-up.

What difference in handling should I expect?

You should notice reduced flex at the steering pivot, resulting in a firmer, more direct steering response and improved corner entry precision.

Any maintenance tips for the graphite part?

Keep mating faces clean and avoid over-torquing the chassis screws to prevent localized stress on the graphite. Inspect periodically for hairline damage after heavy use.

Copyright © 2008-2026 rcjaz.ca All rights reserved