TRX-6 MERCEDES-BENZ 90mm Aluminium L-shape Piggy Back Dampers TRX6090BZFRL by GPM  [TRX6090BZFRL]

6061 T6 Aluminium L-shape Piggy Back Dampers for TRX-6

This upgrade set is made for the TRAXXAS TRX-6 MERCEDES-BENZ 1/10 6WD chassis to add lift and better manage suspension travel. The damper bodies are machined from 6061 T6 aluminium and use an L-shape piggy back reservoir to extend oil travel and help smooth damping under slow, technical crawling loads.

Adjustment is done via multiple positioning holes on the supplied damper mounts. Fit the shock bodies through the chosen holes to alter ride height and roll bias. The alloy bodies include a service-friendly shock cap to lower leak risk while allowing maintenance.

Choose these dampers when you want extra ground clearance and longer stroke for scale off-road lines. Keep in mind that raising ride height alters the vehicle center of gravity and can increase rollover tendency, so balance lift with track conditions and setup choices.

For TRX-6 builders wanting a robust, adjustable lift solution, this 6061 T6 aluminium piggy back damper set increases travel and mounting flexibility; if you raise ride height, consider wider hex hubs or ballast to reduce rollover risk.