TRX4M Front and Rear Brass Axle Cover TRX4M012AX by GPM  [TRX4M012AX]

TRAXXAS TRX4M FORD BRONCO 97074-1 Brass Front/Rear AXLE Cover - GPM TRX4M012AX
Price:
CAD$30.77
Brand:
GPM
Model:
TRX4M012AX
GTIN:
4894538369533
Condition:
Brand New
Write a review
alt="TRAXXAS TRX4M FORD BRONCO 97074-1 Brass Front/Rear AXLE Cover - GPM TRX4M012AX" title="TRAXXAS TRX4M FORD BRONCO 97074-1 Brass Front/Rear AXLE Cover - GPM TRX4M012AX"
alt="TRAXXAS TRX4M FORD BRONCO 97074-1 Brass Front/Rear AXLE Cover - GPM TRX4M012AX" title="TRAXXAS TRX4M FORD BRONCO 97074-1 Brass Front/Rear AXLE Cover - GPM TRX4M012AX"
alt="TRAXXAS TRX4M FORD BRONCO 97074-1 Brass Front/Rear AXLE Cover - GPM TRX4M012AX" title="TRAXXAS TRX4M FORD BRONCO 97074-1 Brass Front/Rear AXLE Cover - GPM TRX4M012AX"
alt="TRAXXAS TRX4M FORD BRONCO 97074-1 Brass Front/Rear AXLE Cover - GPM TRX4M012AX" title="TRAXXAS TRX4M FORD BRONCO 97074-1 Brass Front/Rear AXLE Cover - GPM TRX4M012AX"
alt="TRAXXAS TRX4M FORD BRONCO 97074-1 Brass Front/Rear AXLE Cover - GPM TRX4M012AX" title="TRAXXAS TRX4M FORD BRONCO 97074-1 Brass Front/Rear AXLE Cover - GPM TRX4M012AX"

Brass axle cap for TRX4M axles

This precision brass axle cover is an RC-scale replacement made for the TRX4M platform. It mounts over the front or rear axle cover area to protect the axle housing while adding mass that helps stabilize differential feedback during low-speed and trail running.

Manufactured in brass and supplied with cap head screws, the unit installs directly without needing extra fasteners. The cover weighs approximately 13 grams, giving a consistent weighting effect at the axle assembly useful for tuning handling and differential feel.

Packing includes

  • Axle cover - 1pcs
  • Cap head screws 1.4*12 - 4pcs

Original Name / Part No:

9738

Compatible Models

  • TRAXXAS-1/18 4WD TRX4M FORD BRONCO-97074-1
  • TRAXXAS-1/18 4WD TRX4M LAND ROVER DEFENDER-97054-1

Fit this brass axle cover where extra axle housing protection and a modest weight increase are needed to tune differential behaviour on TRX4M 1/18 Ford Bronco and Defender kits; hardware for front and rear cover positions is included.

Which TRX4M kits will this fit?

This cover is intended for TRX4M 1/18 models listed in the compatibility block, specifically the Ford Bronco 97074-1 and Land Rover Defender 97054-1.

Do I need extra screws to fit it?

No extra fasteners are necessary; four cap head screws 1.4x12 are supplied for direct installation to the axle cover area.

How much weight does it add to the axle?

The cover adds approximately 13 grams at the axle cover, which can reduce rotational feedback and help stabilise differential behaviour on tight trails or technical sections.

Is this suitable for full-size vehicles?

No, this is an RC-scale accessory designed specifically for the TRX4M model kits and not intended for real vehicles.

Copyright © 2008-2026 rcjaz.ca All rights reserved