TRX-4 Front C-Hub and Knuckle Upgrade TRX4H100F by GPM  [TRX4H100F]

This front-end upgrade kit is made for TRAXXAS TRX-4 Trail Crawler platforms and carries part number TRX4H100F. The package groups aluminum C-hubs, inner and outer knuckles, spindles, front CVDs and a steering link into a single installation kit to change steering geometry and shock location for trail and rock crawling use.

Key mechanical notes: the C-hubs are machined from high-tensile aluminum and use Delrin collars at the positioning holes to cut metal-on-metal friction where tie rods and shock mounts pass. The lower area of the C-hub is trimmed to add extra clearance beneath the chassis. Knuckle parts alter internal gear pitch and diameter and lower the axle centre to increase body clearance, and the kit allows moving shock mounts so dampers sit slightly outboard rather than perfectly vertical to improve lateral stability when tuning ride height.

The kit is adjustable where indicated by the parts list: tie rods and shock ends can be mounted in alternate holes to modify steering toe and shock angle, and the set includes the fasteners and collars required to assemble the front C-hub, knuckles and spindle/CVD assemblies as supplied.

This product is intended for RC use only and is designed to replace or upgrade the front c-hubs, knuckle arms, spindles and steering link areas on compatible TRX-4 scale crawlers.

Original Name / Part No:

8232+8252+8246+8255A+8258+8257+8228+8229

Compatible Models

• all TRX-4 models