TRX-4 Bevel and Pinion Gear Set 35T/10T TRX41035T by GPM  [TRX41035T]

TRAXXAS TRX4 TRAIL CRAWLER 40CR Steel Differential Bevel Gear 35T & Pinion Gear 10T - GPM TRX41035T
Price:
CAD$30.77
Brand:
GPM
Model:
TRX41035T
GTIN:
4894538380361
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review
alt="TRAXXAS TRX4 TRAIL CRAWLER 40CR Steel Differential Bevel Gear 35T & Pinion Gear 10T - GPM TRX41035T" title="TRAXXAS TRX4 TRAIL CRAWLER 40CR Steel Differential Bevel Gear 35T & Pinion Gear 10T - GPM TRX41035T"

Overview and application

This TRX41035T gear set is an aftermarket replacement composed of a 35T bevel differential gear and matching 10T pinion made from 40CR steel for TRX-4 style gearboxes. It fits inside the inner section of the front or rear gearbox to transfer drive from the transmission to the axle differential and is intended as a service or upgrade item.

Fitment targets the TRX-4 based models listed below; this component restores drivetrain engagement without changing overall gear ratios or motor behaviour. Installation requires normal gearbox disassembly, careful gear mesh setup and bearing inspection to ensure smooth, quiet operation.

Packing includes

  • Diff bevel gear - 1pcs
  • Pinion gear - 1pcs

Original Name / Part No:

8279?8279R

Compatible Models

  • TRAXXAS-1/10 ELECTRIC 4WD TRX4 DEFENDER TRAIL CRAWLER -82056-4
  • TRAXXAS-1/10 ELECTRIC 4WD TRX4 FORD BRONCO TRAIL CRAWLER-82046-4
  • TRAXXAS-1/10 4WD ELECTRIC TRX-4 BLAZER -82076-4
  • TRAXXAS-1/10 AND TRX-4 1972 CHEVROLET K5 BLAZER TRAIL CRAWLER-92086-4
  • TRAXXAS-1/10 AND TRX-4 CHEVROLET K10 TRAIL CRAWLER-92056-4
  • TRAXXAS-1/10 AND TRX-4 CRAWLER EQUIPPED WITH TRAXX-82034-4
  • TRAXXAS-1/10 AND TRX-4 FORD BRONCO TRAIL CRAWLER-92076-4
  • TRAXXAS-1/10 AND TRX-4 FORD F-150 RANGER XLT TRAIL CRAWLER-92046-4
  • TRAXXAS-1/10 AND TRX-4 LAND ROVER DEFENDER TRAIL CRAWLER-82056-4
  • TRAXXAS-1/10 4X4 TRX-4 SPORT HIGH TRAIL EDITION-82044-4
  • TRAXXAS-1/10 TRX-4 SPORT UNASSEMBLED KIT-82010-4
  • TRAXXAS-1/10 TRX-4 SPORT-82024-4
  • TRAXXAS-1/10 TRX-4 UNASSEMBLED KIT-82016-4
  • TRAXXAS-1/10 TRX-6 MERCEDES-BENZ G 63 AMG 6X6-88096-4
  • TRAXXAS-1/10 TRX-6 ULTIMATE RC HAULER-88086-4
  • TRAXXAS-1/10 TRX-6 ULTIMATE RC HAULER-88086-84

Use this set as a direct internal replacement for the listed TRX-4 bevel and pinion assemblies; confirm the part number and set correct mesh and bearing preload during reassembly to maintain dependable drivetrain performance.

Is this a direct swap for stock TRX-4 bevel gears?

Yes, the TRX41035T set is made to replace the internal bevel and pinion in the listed TRX-4 variants; always verify the part numbers before installation.

Do I need special tools to fit the gears?

No specialised tools are required beyond basic gearbox tools, a small driver set and feeler gauges for checking mesh and backlash.

Should I change gear oil or bearings at the same time?

It is good practice to inspect bearings and replace worn ones, and refresh gear oil or grease to protect new gear faces during break-in.

Will this alter my axle ratio or motor performance?

No, the TRX41035T matches the original tooth counts and is intended to restore stock ratios rather than change motor or speed characteristics.

Copyright © 2008-2026 rcjaz.ca All rights reserved