TRAXXAS XO-1 Steel Spur Gear 46T (M1.0) XO046TS Upgrade by GPM  [XO046TS]

TRAXXAS XO-1 Steel Spur Gear 46T (M1.0) - 1pc - GPM XO046TS
Price:
CAD$33.58
Brand:
GPM
Model:
XO046TS
GTIN:
4894538005899
Condition:
Brand New
2 Reviews
Write a review
alt="TRAXXAS XO-1 Steel Spur Gear 46T (M1.0) - 1pc - GPM XO046TS" title="TRAXXAS XO-1 Steel Spur Gear 46T (M1.0) - 1pc - GPM XO046TS"
alt="TRAXXAS XO-1 Steel Spur Gear 46T (M1.0) - 1pc - GPM XO046TS" title="TRAXXAS XO-1 Steel Spur Gear 46T (M1.0) - 1pc - GPM XO046TS"

46T hardened steel spur for XO-1 drivetrains

The XO046TS is a single 46-tooth, M1.0 straight-cut spur gear made for the TRAXXAS XO-1 platform, produced from hardened steel with a black finish. As a drop-in replacement or aftermarket upgrade for RC drivetrains, it provides reliable tooth engagement and a laser-marked tooth count to confirm gear choice at a glance.

Built with a straight-cut profile to lower lateral loads compared with helical gears, this spur keeps gearbox forces predictable in high-speed setups. The hardened-steel construction emphasises wear resistance where it matters, while the black surface finish helps limit surface corrosion during normal hobby use.

Specifications

  • Item Steel Spur Gear 46T (M1.0) - 1 pcs
  • Material Hardened steel
  • Model Number XO046TS
  • Compatibility TRAXXAS XO-1

If you run an XO-1 and want a durable, clearly marked spur for tuning or replacement, this 46T hardened steel option delivers straightforward serviceability and dependable tooth life for high-speed RC use.

This item is compatible with

  • TRAXXAS XO 01
  • TRAXXAS-1/10 MAXX MONSTER TRUCK-89076-4
  • TRAXXAS E-REVO VXL
  • TRAXXAS XMAXX
  • TRAXXAS X MAXX 8S Monster Truck
  • 1/6 4WD XRT 8S-78086-4

 

Product Reviews
2 Reviews
rating
Just finished building a 4-tec 2.0 with GPM parts. SOOO beautiful. After having a bad experience building a wltoys this summer it was nice to once again do another build using GPM parts. The website is nothing to brag about but, the parts are top quality.
rating
Once again it was a pleasure dealing with GPM customer service to inquire about a part. GPM was able to fill my order in a timely manner. Excellent communication from customer service. Thanks GPM!

Will this replace the stock XO-1 spur without modifications?

Yes, the XO046TS matches the M1.0 pitch and 46-tooth count used on the platform and is intended as a direct replacement. Check mesh and fitment during install.

Should I inspect other parts when changing the spur?

Inspect the pinion and bearings for wear, verify correct backlash across several teeth, and retighten fasteners to avoid movement under load.

Does hardened steel reduce maintenance frequency?

Hardened steel improves wear resistance over softer materials, so gears tend to last longer under high load, but routine checks and lubrication of associated components are still recommended.

Any tips for setting mesh on a straight-cut spur?

Aim for a small, even backlash across the face, rotate the gear to check multiple teeth, and secure pinion and spur hardware so the mesh stays consistent at speed.

Copyright © 2008-2026 rcjaz.ca All rights reserved