TRAXXAS X-MAXX CVD Front and Rear Hardened Steel Upgrade +1.5mm Body - TXM8160S by GPM  [TXM8160S]

TRAXXAS X-MAXX #45 Harden Steel CVD For Front + Rear - 2pc set For 8s Only - GPM TXM8160S
Price:
CAD$62.41
Brand:
GPM
Model:
TXM8160S
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review
alt="TRAXXAS X-MAXX #45 Harden Steel CVD For Front + Rear - 2pc set For 8s Only - GPM TXM8160S" title="TRAXXAS X-MAXX #45 Harden Steel CVD For Front + Rear - 2pc set For 8s Only - GPM TXM8160S"

Reinforced CVDs for X-MAXX drivetrains

The TXM8160S CVD set from GPM is an aftermarket replacement engineered for TRAXXAS X-MAXX drivetrains that require heavier-duty components. The CVD bodies are hardened steel with a black surface finish and an increased cross-section to cope with the extra loads produced by upgraded motors and higher-voltage battery setups.

Key dimensional details from the supplied data: the CVD body is 1.5mm thicker than the original, the shaft pin diameter is increased by 0.5mm, the fixed assembly length is 160mm, and the unit uses a 4.0mm pin. The set includes two pieces for front and rear use and is specified for 8s operation only.

Practically, these CVDs replace softer factory units that can flex or show wear under higher torque, restoring torsional stiffness and reducing drivetrain play that degrades throttle feel and steering feedback. Fitment targets the X-MAXX platform and these parts are intended for hobby RC use only.

Specifications

  • Item: TRAXXAS X-MAXX #45 CVD set front and rear
  • Material: Hardened steel
  • Model Number: TXM8160S
  • Compatibility: TRAXXAS X-MAXX
  • Fixed Length: 160mm
  • Pin Diameter: 4.0mm
  • Set Count: 2 pcs
  • Body Thickness Increase: +1.5mm vs original
  • Pin Thickness Increase: +0.5mm vs original
  • Finish: Black hardened surface

Choose this CVD set when upgrading or repairing an X-MAXX running higher voltage or aftermarket power to improve torsional rigidity and pin retention for more predictable throttle and steering response.

Will these CVDs swap onto stock X-MAXX axles?

They are designed for TRAXXAS X-MAXX fitment, but confirm your axle interface and pin location before attempting a direct swap to ensure correct mating and clearance.

What are the exact pin and length specs?

Per the product data the assembly uses a 4.0mm pin with a fixed length of 160mm and a pin diameter increased by 0.5mm over the original.

How does the hardened finish help?

The hardened steel body and black surface finish improve wear resistance compared to softer factory parts, helping retain geometry under higher torque loads.

How many pieces are included?

The package contains 2 pcs intended for front and rear CVD positions on the X-MAXX platform, as stated in the specifications.

Copyright © 2008-2026 rcjaz.ca All rights reserved