Traxxas X-Maxx 8S CVD Drive Upgrade Hardened Steel #45 TXM8170N by GPM  [TXM8170N]

TRAXXAS X-MAXX Harden Steel #45 CVD For 8s Front Or Rear With Alloy Hex - 8pc set - GPM TXM8170N
Price:
CAD$88.82
Brand:
GPM
Model:
TXM8170N
GTIN:
4894538285666
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review
alt="TRAXXAS X-MAXX Harden Steel #45 CVD For 8s Front Or Rear With Alloy Hex - 8pc set - GPM TXM8170N" title="TRAXXAS X-MAXX Harden Steel #45 CVD For 8s Front Or Rear With Alloy Hex - 8pc set - GPM TXM8170N"
alt="TRAXXAS X-MAXX Harden Steel #45 CVD For 8s Front Or Rear With Alloy Hex - 8pc set - GPM TXM8170N" title="TRAXXAS X-MAXX Harden Steel #45 CVD For 8s Front Or Rear With Alloy Hex - 8pc set - GPM TXM8170N"
alt="TRAXXAS X-MAXX Harden Steel #45 CVD For 8s Front Or Rear With Alloy Hex - 8pc set - GPM TXM8170N" title="TRAXXAS X-MAXX Harden Steel #45 CVD For 8s Front Or Rear With Alloy Hex - 8pc set - GPM TXM8170N"
alt="TRAXXAS X-MAXX Harden Steel #45 CVD For 8s Front Or Rear With Alloy Hex - 8pc set - GPM TXM8170N" title="TRAXXAS X-MAXX Harden Steel #45 CVD For 8s Front Or Rear With Alloy Hex - 8pc set - GPM TXM8170N"
alt="TRAXXAS X-MAXX Harden Steel #45 CVD For 8s Front Or Rear With Alloy Hex - 8pc set - GPM TXM8170N" title="TRAXXAS X-MAXX Harden Steel #45 CVD For 8s Front Or Rear With Alloy Hex - 8pc set - GPM TXM8170N"
alt="TRAXXAS X-MAXX Harden Steel #45 CVD For 8s Front Or Rear With Alloy Hex - 8pc set - GPM TXM8170N" title="TRAXXAS X-MAXX Harden Steel #45 CVD For 8s Front Or Rear With Alloy Hex - 8pc set - GPM TXM8170N"
alt="TRAXXAS X-MAXX Harden Steel #45 CVD For 8s Front Or Rear With Alloy Hex - 8pc set - GPM TXM8170N" title="TRAXXAS X-MAXX Harden Steel #45 CVD For 8s Front Or Rear With Alloy Hex - 8pc set - GPM TXM8170N"
alt="TRAXXAS X-MAXX Harden Steel #45 CVD For 8s Front Or Rear With Alloy Hex - 8pc set - GPM TXM8170N" title="TRAXXAS X-MAXX Harden Steel #45 CVD For 8s Front Or Rear With Alloy Hex - 8pc set - GPM TXM8170N"
alt="TRAXXAS X-MAXX Harden Steel #45 CVD For 8s Front Or Rear With Alloy Hex - 8pc set - GPM TXM8170N" title="TRAXXAS X-MAXX Harden Steel #45 CVD For 8s Front Or Rear With Alloy Hex - 8pc set - GPM TXM8170N"

Reinforced CVD drive for X-Maxx 8S

This 8-piece CVD drive set is supplied as a direct aftermarket reinforcement for Traxxas X-Maxx running on 8S power. Hardened steel #45 is used for the main drive components to increase wear resistance and handle the higher RPMs produced by high-power setups.

The kit implements a thicker dogbone profile grown from the common 5.5mm to a 7mm section and replaces the original hex retention with a perforated alloy hex secured by a stainless steel pin. These revisions keep the hex concentric under load and help reduce slippage between the CVD and hex at high speed.

The supplier lists included items for reference: Hex Adapter - 2 pcs, Stainless Steel Screw Shaft M5x4x20 - 2 pcs, Set Screws 5x5 - 2 pcs, with Manual numbers 7750, 7737, 7756. The assembly transmits drive from the gearbox to the wheels so tyres rotate consistently during high-speed runs.

Compatible Models

  • Traxxas Xmaxx 8S

Choose this set to boost drivetrain durability on an X-Maxx running 8S power, and verify fitment and the pin-secured alloy hex seating during installation before test running.

Can this kit be fitted to both front and rear drives?

The set is specified for Traxxas Xmaxx 8S and is intended for use in front or rear locations; check clearance and orientation on your chassis before final fitment.

Why use hardened steel #45 in these CVDs?

Hardened steel #45 offers improved wear resistance compared with softer steels, helping the drive components survive higher rotational speeds and loads from 8S setups.

What hardware is supplied with the kit?

The supplier lists Hex Adapter 2 pcs, Stainless Steel Screw Shaft M5x4x20 2 pcs, Set Screws 5x5 2 pcs, and references manual numbers 7750, 7737, 7756 for identification.

Any tips for installing the pin-secured alloy hex?

Align the perforation with the CVD hex bore, drive the stainless pin fully, and check there is no axial play before tightening and running the model at low speed for a test.

Copyright © 2008-2026 rcjaz.ca All rights reserved