TRAXXAS UNLIMITED DESERT RACER Hex +3mm with Swirl Brake Disk UDR010D+3MM by GPM  [UDR010D+3MM]

Aluminium +3mm Wheel Hex with Brake Rotor

This aftermarket aluminum +3mm hex set with integrated brake rotors is made for the TRAXXAS UNLIMITED DESERT RACER platform. It pairs a widened hex hub with a decorative brake disk to shift wheel offset and enhance scale styling while remaining a model-only tuning part.

Included hardware from the original product note: brake disk - 2 pcs, pins 2.5*10.5 - 2 pcs. Use the supplied pins when fitting the disks to the hub to preserve the intended assembly method.

Functionally, the disks increase the effective hub width from the original 11mm to 14mm, widening track and potentially improving chassis stability in some setups. The outer ring features a swirl engraving for a modern metallic look and as an orientation aid during installation.

Installation tips: check wheel and hex clearance before final torque, align the brake disk to the wheel hub and secure with the supplied pins, then confirm the wheel spins freely without rubbing. Use the correct hex driver and retain original fasteners where applicable. This item is intended for model tuning and should be validated against your wheel, axle, and suspension geometry.