TRAXXAS UNLIMITED DESERT RACER 28T Motor Pinion Hardened Steel #45 UDR028TS by GPM  [UDR028TS]

TRAXXAS UNLIMITED DESERT RACER Harden Steel #45 Motor Gear 28T - 2pc set - GPM UDR028TS
Price:
CAD$12.29
Brand:
GPM
Model:
UDR028TS
GTIN:
4894538327885
Condition:
Brand New
Write a review
alt="TRAXXAS UNLIMITED DESERT RACER Harden Steel #45 Motor Gear 28T - 2pc set - GPM UDR028TS" title="TRAXXAS UNLIMITED DESERT RACER Harden Steel #45 Motor Gear 28T - 2pc set - GPM UDR028TS"
alt="TRAXXAS UNLIMITED DESERT RACER Harden Steel #45 Motor Gear 28T - 2pc set - GPM UDR028TS" title="TRAXXAS UNLIMITED DESERT RACER Harden Steel #45 Motor Gear 28T - 2pc set - GPM UDR028TS"
alt="TRAXXAS UNLIMITED DESERT RACER Harden Steel #45 Motor Gear 28T - 2pc set - GPM UDR028TS" title="TRAXXAS UNLIMITED DESERT RACER Harden Steel #45 Motor Gear 28T - 2pc set - GPM UDR028TS"
alt="TRAXXAS UNLIMITED DESERT RACER Harden Steel #45 Motor Gear 28T - 2pc set - GPM UDR028TS" title="TRAXXAS UNLIMITED DESERT RACER Harden Steel #45 Motor Gear 28T - 2pc set - GPM UDR028TS"
alt="TRAXXAS UNLIMITED DESERT RACER Harden Steel #45 Motor Gear 28T - 2pc set - GPM UDR028TS" title="TRAXXAS UNLIMITED DESERT RACER Harden Steel #45 Motor Gear 28T - 2pc set - GPM UDR028TS"

Aftermarket motor pinion for the pinion area

This RC pinion is produced for use with TRAXXAS UNLIMITED DESERT RACER setups and installs in the motor pinion area. Made from hardened steel #45, the 28T gear is suited to resist wear during frequent running and tuning sessions.

Included items are listed below, with quantities shown as provided by the manufacturer:

  • Motor Gear - 1pcs
  • 4x4 Set Screw - 1pcs

The supplied gear is 28T while the referenced original is 127T; installation requires aligning the gear with the correct positioning hole on the motor mount. Check gear mesh carefully and tighten the set screw to ensure proper motor alignment and reliable operation in RC running.

Will this fit the motor pinion location on my model?

Yes, this 28T pinion is made to install in the motor pinion area of TRAXXAS UNLIMITED DESERT RACER style setups; verify the mount hole alignment before final fitment.

Do I need special tools to install it?

Basic hand tools are sufficient: a small hex driver for the 4x4 set screw and a way to set correct mesh, such as a shim or thickness gauge.

Any tips for reliable gear mesh?

Align the gear to the motor mount positioning hole, set a slight backlash for smooth engagement, then secure the set screw and recheck after a short test run.

Copyright © 2008-2026 rcjaz.ca All rights reserved