TRAXXAS Tmaxx 3.3 Main Chassis Alloy 4.5mm - TMX3016V by GPM  [TMX3016V]

TRAXXAS Tmaxx 3.3 #4909 Alloy Main Chassis 4.5mm Thick With Screws - 1pc set - GPM TMX3016V
Price:
CAD$26.56
Brand:
GPM
Model:
TMX3016V
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Alloy replacement plate for TRAXXAS Tmaxx 3.3

This single-piece alloy main chassis is an aftermarket replacement for the TRAXXAS Tmaxx 3.3 platform, supplied as a 1pc set with mounting screws included. It is designed to match the stock screw pattern and central mounting points so the swap-over from the original plate is straightforward.

The 4.5mm alloy construction provides a noticeably stiffer backbone than stock plastic plates, improving overall structural rigidity for heavy-duty running and jumps. Screws are included to get the chassis installed quickly while allowing original hardware to be transferred where required.

Fitting normally requires removal of the original chassis plate, moving motor, ESC and servo mounts across, and securing this alloy plate in the factory holes; check alignment and driveline clearance before final tightening to avoid binding.

Specifications

  • Item Alloy Main Chassis, 4.5mm thick, includes screws, 1pc set
  • Material Alloy
  • Model Number TMX3016V
  • Compatibility TRAXXAS Tmaxx 3.3 #4909

Choose this alloy chassis when you want a direct-fit upgrade for TRAXXAS Tmaxx 3.3 #4909 to reduce flex and improve impact resistance; confirm fitment on your truck before extended use.

Will this replace the stock plastic plate on my Tmaxx 3.3?

Yes, this aftermarket alloy plate is made to the stock mounting pattern for the TRAXXAS Tmaxx 3.3 #4909 and is supplied with screws for installation.

Do I need special tools to fit it?

Basic hand tools are sufficient: a screwdriver set and a socket or nut driver for existing hardware. Use a torque approach and check driveline alignment during install.

Will the thicker plate change handling?

A stiffer chassis reduces flex which can alter weight transfer and suspension feel; you may need to tweak shocks or spring rates to restore your preferred handling balance.

Are the supplied screws long enough for my setup?

The kit ships with mounting screws intended for standard Tmaxx 3.3 layouts; if you run large electronics or spacers, verify screw length before final assembly and source longer fasteners if needed.

Copyright © 2008-2026 rcjaz.ca All rights reserved