TRAXXAS Tmaxx 100mm Alloy Front/Rear Damper Set - TMX13100 by GPM  [TMX13100]

Aluminium shock set for TRAXXAS Tmaxx

This aluminium alloy damper pair is supplied as a 1pr set for TRAXXAS Tmaxx models and specified at 100mm overall length with screws and collars included, designed to replace matched front and rear dampers on Tmaxx 3.3 and Tmaxx 1.1 platforms.

These parts act as direct replacement shock bodies when the same damper length and mounting pattern are required. In tuning and setup they hold oil and spring assemblies and establish static ride height and suspension geometry when fitted with the correct internals from the donor chassis.

Installation tips: check your chassis shock eye spacing to confirm the 100mm length, inspect mounting points for fit, fit the supplied screws and collars as retention, and confirm full suspension travel after installation. This is an RC accessory and not intended for use on real vehicles.

Choose these alloy dampers when you need matched 100mm front and rear replacements for TRAXXAS Tmaxx 3.3 or Tmaxx 1.1, with hardware included for a straightforward swap.