TRAXXAS SUMMIT Front Shock Tower Alloy SUM028 by GPM  [SUM028]

Alloy front shock tower for Summit chassis

This alloy front shock tower is made as a single replacement piece for the TRAXXAS SUMMIT platform and is supplied as 1pc. It replaces the stock tower while keeping the Summit front mounting pattern for a firmer mounting surface.

Installation uses the SUMMIT front assembly mounting points and the original hole pattern, so fitting mainly means aligning the tower and refitting the stock hardware. Check clearances around the shock ends and steering links before final tightening to prevent binding.

From a setup perspective the alloy tower reduces local flex at the shock mounts, helping the shocks hold their geometry under hard landings and heavy trail use. Combine this tower with spring and damper tuning to dial in front-end stiffness and handling balance.