TRAXXAS Slash 4x4 Rear CVD Harden Steel #45 12mmx6mm Hex Upgrade SSLA1277RHST by GPM  [SSLA1277RHST]

TRAXXAS 1/10 Slash 4x4 Harden Steel #45 Rear CVD Drive Shaft With 12mmx6mm Wheel Hex - 8pc set - GPM SSLA1277RHST
Price:
CAD$46.82
Brand:
GPM
Model:
SSLA1277RHST
GTIN:
4894538322477
Condition:
Brand New
Write a review
alt="TRAXXAS 1/10 Slash 4x4 Harden Steel #45 Rear CVD Drive Shaft With 12mmx6mm Wheel Hex - 8pc set - GPM SSLA1277RHST" title="TRAXXAS 1/10 Slash 4x4 Harden Steel #45 Rear CVD Drive Shaft With 12mmx6mm Wheel Hex - 8pc set - GPM SSLA1277RHST"
alt="TRAXXAS 1/10 Slash 4x4 Harden Steel #45 Rear CVD Drive Shaft With 12mmx6mm Wheel Hex - 8pc set - GPM SSLA1277RHST" title="TRAXXAS 1/10 Slash 4x4 Harden Steel #45 Rear CVD Drive Shaft With 12mmx6mm Wheel Hex - 8pc set - GPM SSLA1277RHST"
alt="TRAXXAS 1/10 Slash 4x4 Harden Steel #45 Rear CVD Drive Shaft With 12mmx6mm Wheel Hex - 8pc set - GPM SSLA1277RHST" title="TRAXXAS 1/10 Slash 4x4 Harden Steel #45 Rear CVD Drive Shaft With 12mmx6mm Wheel Hex - 8pc set - GPM SSLA1277RHST"

Rear drivetrain summary

This 8pcs SSLA1277RHST rear CVD drive shaft from GPM is a direct aftermarket replacement for the TRAXXAS 1/10 Slash 4x4 rear axle. Fabricated from Harden Steel #45, the CVD layout keeps rotational smoothness while the retractable sections preserve suspension articulation and clearance. A spring steel wheel hex stabiliser is supplied to cut play under acceleration and in tight cornering, targeting hobbyists seeking a tougher, responsive rear drivetrain on electric 1/10 Slash 4x4 vehicles.

Installation notes: fit this assembly to the rear axle using the supplied screw pins and O-rings; a basic rear differential and axle housing teardown is required. Complete final checks on hex retention and pin seating before running to ensure safe operation.

Packing includes

  • Item - 8pcs

Original Name / Part No:

6850X+6828X+6854X

Specifications

  • Item: Rear CVD drive shaft set for TRAXXAS 1/10 Slash 4x4, 8 pcs
  • Material: Harden Steel #45
  • Model Number: SSLA1277RHST
  • Compatibility: TRAXXAS 1/10 Slash 4x4 (rear axle)

The SSLA1277RHST rear CVD shaft set provides a rugged steel upgrade intended to improve rear drivetrain durability and stability for 1/10 Slash 4x4 builds; verify fit and torque settings during installation.

This item is compatible with

  • TRAXXAS Slash 4X4

What is included in the package?

The kit contains eight rear CVD shafts and the ancillary parts listed in the Packing includes and Original Name / Part No sections to complete the rear axle swap.

Will these fit a stock Slash 4x4 rear axle?

Yes, the components are specified for the TRAXXAS 1/10 Slash 4x4 rear axle and are intended as a direct-fit upgrade, though basic disassembly of the rear diff is required.

Why use Harden Steel #45?

Harden Steel #45 delivers improved wear resistance and rigidity compared with typical stock alloys, helping the rear drivetrain withstand higher loads and reduce deformation.

Any tips for installation and setup?

Ensure screw pins and O-rings are seated correctly, confirm the spring steel hex stabiliser holds the wheel hex, and check suspension travel to avoid binding before the first run.

Copyright © 2008-2026 rcjaz.ca All rights reserved