This GPM SLA102R rear adjustable spring damper is an RC-scale replacement designed to give TRAXXAS SLASH 4X4 owners a compact, serviceable alloy option for rear suspension tuning. The pair ships with three spring rates and a beefy 4mm shaft to let you change rebound and midstroke response without altering core suspension geometry.
Features include alloy ball top and alloy ball ends and the included 1.3mm, 1.5mm and 1.7mm coil springs so you can dial preload and effective spring rate. The 4mm shaft improves rigidity versus thinner rods and helps the shock keep alignment under high-frequency hits common to short-course running.
Fitting notes: this damper is intended as a direct rear shock replacement for the listed chassis; verify hole spacing and tower clearance before installing. When tuning, swap springs one step at a time and recheck ride height and droop after each change to retain predictable handling. This is an RC accessory only and not for full-size vehicle use.
Use these dampers to fine-tune rear response on TRAXXAS SLASH 4X4 rigs where small changes to spring rate and shaft stiffness improve balance and bump control.
Copyright © 2008-2026 rcjaz.ca All rights reserved