TRAXXAS Slash 4x4 Front Damper Rebuild Kit 14pc SLA087F/KITA by GPM  [SLA087F/KITA]

TRAXXAS Slash 4x4 Alloy Rebuild Kit For SLA087F Front Damper - 14pc set - GPM SLA087F/KITA
Price:
CAD$27.96
Brand:
GPM
Model:
SLA087F/KITA
GTIN:
4894538300154
Condition:
Brand New
Write a review
alt="TRAXXAS Slash 4x4 Alloy Rebuild Kit For SLA087F Front Damper - 14pc set - GPM SLA087F/KITA" title="TRAXXAS Slash 4x4 Alloy Rebuild Kit For SLA087F Front Damper - 14pc set - GPM SLA087F/KITA"
alt="TRAXXAS Slash 4x4 Alloy Rebuild Kit For SLA087F Front Damper - 14pc set - GPM SLA087F/KITA" title="TRAXXAS Slash 4x4 Alloy Rebuild Kit For SLA087F Front Damper - 14pc set - GPM SLA087F/KITA"
alt="TRAXXAS Slash 4x4 Alloy Rebuild Kit For SLA087F Front Damper - 14pc set - GPM SLA087F/KITA" title="TRAXXAS Slash 4x4 Alloy Rebuild Kit For SLA087F Front Damper - 14pc set - GPM SLA087F/KITA"

Front damper service kit

This rebuild kit fits the SLA087F front damper assembly used on the TRAXXAS Slash 4x4 and supplies the small alloy parts and seals needed when servicing the scale damper. The package covers common wear items so you can restore damper motion and seal integrity without replacing the entire shock body.

Carry this kit when checking rebound and compression characteristics, replacing worn ball ends or O-rings, or renewing lower mounts and spacers during a teardown. Parts are precision-machined alloy with replacement seals sized for the SLA087F front damper service points. Install with correct thread engagement and confirm free stroke before running.

Included parts list (kit contents): Spacer - 2pcs, Lower Mount - 2pcs, Damper Rod + Ballend - 2pcs, 4x2 White Silicon O-Ring - 4pcs, 11x1.5 Black O-Ring - 2pcs.

Specifications

  • Item: Alloy front damper rebuild kit, 14pcs set
  • Material: Alloy
  • Model Number: SLA087F/KITA
  • Compatibility: TRAXXAS Slash 4x4

A practical parts-level kit for hobbyists servicing SLA087F front dampers on the TRAXXAS Slash 4x4, aimed at regular maintenance and tuning support.

What items are in the 14-piece kit?

The kit contains two spacers, two lower mounts, two damper rods with ballends, four 4x2 white silicon O-rings and two 11x1.5 black O-rings, adding up to 14 pieces.

Can these parts be used on other models?

This set is intended for the SLA087F front damper as fitted to the TRAXXAS Slash 4x4. Verify part numbers before attempting cross-model installation.

Will I need extra seals or tools?

No additional seals are required beyond the kit contents, but standard hobby tools such as hex drivers and pliers are needed to disassemble and reassemble the damper.

How does replacing these parts affect tuning?

Renewing worn ball ends, mounts and O-rings restores predictable piston travel and seal performance, helping to keep damping characteristics repeatable during setup.

Copyright © 2008-2026 rcjaz.ca All rights reserved