Traxxas Revo Multi-Position Engine Mount with Heat Sink RE-052/B by 3Racing  [RE-052/B]

Adjustable engine mount with integrated heat sink for Revo

This is an RC-scale replacement hop-up made for the Traxxas Revo platform that pairs multiple engine mounting positions with an integrated heat sink and blue finish. The following notes outline compatibility, fitting guidance, and how the part impacts chassis tuning and local thermal control.

Compatibility is limited to Traxxas Revo models; this is not suitable for full-size vehicles. The mount replaces the stock bracket to provide alternate engine locations and a metal surface intended to help dissipate heat near nitro or other small combustion installations where applicable.

Installation notes: the mount locates to the Revo's factory engine points and usually requires removal of the original mount and transfer of the engine fasteners. Confirm thread sizes before reuse and fit appropriate hardware where needed. After installation, check engine alignment and driveline runout to avoid gearbox binding or excess load on drivetrain bearings.

Tuning impact: shifting engine placement changes weight distribution and can be used to refine balance and traction. The heat-dissipating contact area offers passive temperature control, but you should reassess suspension trim and ride height after any engine relocation.

Fit this mount when tuning chassis balance or when you need improved local heat dispersion on Traxxas Revo models, and always verify fitment and driveline alignment during installation to protect drivetrain life.