TRAXXAS Revo Alloy Front and Rear Steering Blocks TRV021 by GPM  [TRV021]

TRAXXAS Revo /Revo 3.3 Alloy Front / Rear Steering Block With Delrin Screws + Dust-Proof Hat + Plastic O-rings - 1 Pr set - GPM TRV021
Price:
CAD$37.15
Brand:
GPM
Model:
TRV021
GTIN:
4894538204926
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Alloy steering knuckles for Revo platforms

These alloy front and rear steering blocks are made for use on TRAXXAS Revo and Revo 3.3 trucks, supplied with Delrin mounting screws, dust-proof hats and plastic O-rings. The components are intended as direct-fit aftermarket replacements to restore steering geometry and give a robust mounting point for the suspension knuckles.

The kit is aimed at serviceability and routine maintenance: Delrin screws reduce metal-on-metal contact in retainers, dust-proof hats limit grit ingress around bearings and pivots, and plastic O-rings provide basic sealing where applicable. Together, these parts simplify roadside repairs and fast turnarounds during tuning sessions.

Installation notes: the blocks replace the stock steering blocks using the existing mounting points on the Revo chassis, so confirm correct orientation for front and rear fitment and torque fasteners to the chassis manufacturer's specification. Recheck wheel alignment and steering linkage geometry after fitment to preserve handling balance.

Specifications

  • Item: Front and rear steering blocks set
  • Material: Alloy, Delrin, plastic O-rings
  • Model Number: TRV021
  • Compatibility: TRAXXAS Revo, Revo 3.3

For hobbyists maintaining or upgrading a TRAXXAS Revo chassis, this TRV021 set provides a practical alloy replacement with polymer fasteners and dust protection to support routine tuning and on-track repairs.

This item is compatible with

  • Traxxas REVO

Do these fit both the Revo and Revo 3.3?

Yes, the listing covers compatibility with both TRAXXAS Revo and Revo 3.3 chassis and the parts are shaped to match the original mounting points.

Can I reuse the Delrin screws after removal?

Delrin fasteners are generally reusable if the threads and heads show no damage; inspect them closely and replace any that are worn or deformed.

Do the dust-proof hats need glue to stay put?

The dust caps are designed to seat securely in the knuckle area; avoid adhesive on plastic caps and use light threadlocker only on metal fasteners if your setup calls for it.

What post-install checks are recommended?

Verify steering throw, tie rod parallelism, wheel camber and toe settings, and ensure there is no binding in the suspension or steering pivots before running the truck.

Copyright © 2008-2026 rcjaz.ca All rights reserved