TRAXXAS MAXX Front Steering Upgrade Aluminum 7075-T6 TXMS048N by GPM  [TXMS048N]

TRAXXAS MAXX MONSTER TRUCK Aluminum 7075-T6 Front Steering Assembly - GPM TXMS048N
Price:
CAD$57.47
Brand:
GPM
Model:
TXMS048N
GTIN:
4894538375787
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review
alt="TRAXXAS MAXX MONSTER TRUCK Aluminum 7075-T6 Front Steering Assembly - GPM TXMS048N" title="TRAXXAS MAXX MONSTER TRUCK Aluminum 7075-T6 Front Steering Assembly - GPM TXMS048N"
alt="TRAXXAS MAXX MONSTER TRUCK Aluminum 7075-T6 Front Steering Assembly - GPM TXMS048N" title="TRAXXAS MAXX MONSTER TRUCK Aluminum 7075-T6 Front Steering Assembly - GPM TXMS048N"
alt="TRAXXAS MAXX MONSTER TRUCK Aluminum 7075-T6 Front Steering Assembly - GPM TXMS048N" title="TRAXXAS MAXX MONSTER TRUCK Aluminum 7075-T6 Front Steering Assembly - GPM TXMS048N"
alt="TRAXXAS MAXX MONSTER TRUCK Aluminum 7075-T6 Front Steering Assembly - GPM TXMS048N" title="TRAXXAS MAXX MONSTER TRUCK Aluminum 7075-T6 Front Steering Assembly - GPM TXMS048N"
alt="TRAXXAS MAXX MONSTER TRUCK Aluminum 7075-T6 Front Steering Assembly - GPM TXMS048N" title="TRAXXAS MAXX MONSTER TRUCK Aluminum 7075-T6 Front Steering Assembly - GPM TXMS048N"

Aluminium front steering assembly for MAXX applications

This aluminium front steering assembly is a direct replacement designed to take over the steering linkage duties on TRAXXAS MAXX monster trucks. Constructed from 7075-T6, the metal components and included bearings reduce flex in the steering geometry so the servo transmits motion more directly to the hubs.

The kit is supplied complete with the bearings, king pins and mounting screws required to swap out the stock plastic steering parts. In operation it firms up turn-in and delivers a more solid connection between the servo output and wheel hubs, useful when fitting higher torque servos or fine tuning steering response.

Packing includes

  • Steering assembly (1 set of 3 pieces) - 3pcs
  • Grade 12.9 black round head screw 3x20 - 2pcs
  • Grade 12.9 black round head screw 3x16 - 1pc
  • King pin - 2pcs
  • Bearing 5x8x2.5 - 2pcs
  • Bearing 8x12x3.5 - 2pcs
  • Stainless steel washer 5x8x0.1 - 2pcs
  • M3 Lock nut - 4pcs

Original Name / Part No:

8946

Compatible Models

  • TRAXXAS-1/10 4WD MAXX MONSTER TRUCK -89076-4
  • TRAXXAS-1/10 4WD MAXX W/WIDE MAXX MONSTER TRUCK-89086-4

Offered as an aftermarket aluminium option, this assembly is intended for a straightforward swap into the listed TRAXXAS MAXX models and focuses on keeping steering geometry consistent under load rather than altering appearance.

Will TXMS048N fit the standard 1/10 MAXX front end?

Yes, the part is made to fit the listed TRAXXAS MAXX variants shown in the compatibility box; verify the servo horn and link offsets during installation to ensure correct alignment.

What bearings and hardware come with the kit?

The package includes the steering assembly, grade 12.9 screws (3x20 and 3x16), king pins, bearings 5x8x2.5 and 8x12x3.5, stainless washers and M3 lock nuts as listed in the packing section.

Will this work with a high-torque metal-geared servo?

Yes, the 7075-T6 construction and bearings reduce deflection under load, making steering inputs from higher-torque servos more consistent; check your linkage geometry and servo travel before final use.

Any tips for installation?

Remove the stock plastic pieces, fit the aluminium assembly with the supplied hardware, confirm bearings seat correctly and recheck toe and steering endplay after tightening to avoid binding.

Copyright © 2008-2026 rcjaz.ca All rights reserved