TRAXXAS MAXX 25T 7075 Aluminum Servo Horn 3pcs TXMS025T75 by GPM  [TXMS025T75]

7075 Aluminum 25T Servo Horn for TRAXXAS MAXX

This 7075 aluminum servo horn is an aftermarket replacement made for TRAXXAS MAXX Monster Truck models, supplied as a 3pcs set TXMS025T75. It is an RC-scale steering arm produced from 7075 aluminum to deliver greater stiffness and wear resistance compared with stock plastic arms, and it mounts at the servo to help stabilise steering feel.

Design notes: the straight-arm profile preserves predictable link geometry under load, reducing slop and helping the system hold center under aggressive inputs. The 25T fitment matches common 25-tooth servo splines used on many MAXX setups so it installs where a 25T interface is required.

Installation and tuning role: use the supplied stainless fasteners and check screw lengths and thread engagement through the servo horn and servo saver stack. After fitting, confirm linkage alignment and trim endpoints and centring on your transmitter to benefit from the added rigidity without binding. In tuning this part supports crisper steering response and clearer feedback to the driver on rough terrain where plastic arms may flex.

Included items in the package are listed below for reference, use these parts when replacing the servo horn to retain correct mounting hardware and position within the servo area.