TRAXXAS JATO 4X4 VXL Front Steering Toe Links 7075 Alloy 98mm - TJ162 by GPM  [TJ162]

TRAXXAS JATO 4X4 VXL 7075 Alloy Front Steering Toe Links - GPM TJ162
Price:
CAD$24.72
Brand:
GPM
Model:
TJ162
GTIN:
4894538400946
Condition:
Brand New
Write a review
alt="TRAXXAS JATO 4X4 VXL 7075 Alloy Front Steering Toe Links - GPM TJ162" title="TRAXXAS JATO 4X4 VXL 7075 Alloy Front Steering Toe Links - GPM TJ162"
alt="TRAXXAS JATO 4X4 VXL 7075 Alloy Front Steering Toe Links - GPM TJ162" title="TRAXXAS JATO 4X4 VXL 7075 Alloy Front Steering Toe Links - GPM TJ162"
alt="TRAXXAS JATO 4X4 VXL 7075 Alloy Front Steering Toe Links - GPM TJ162" title="TRAXXAS JATO 4X4 VXL 7075 Alloy Front Steering Toe Links - GPM TJ162"
alt="TRAXXAS JATO 4X4 VXL 7075 Alloy Front Steering Toe Links - GPM TJ162" title="TRAXXAS JATO 4X4 VXL 7075 Alloy Front Steering Toe Links - GPM TJ162"
alt="TRAXXAS JATO 4X4 VXL 7075 Alloy Front Steering Toe Links - GPM TJ162" title="TRAXXAS JATO 4X4 VXL 7075 Alloy Front Steering Toe Links - GPM TJ162"

Toe link construction overview

This pair of front steering toe links replaces the stock link set on TRAXXAS JATO 4X4 VXL models and is supplied as two matched fixed-length rods. Each link is machined from 7075 aluminium and finished with anodizing to resist corrosion while maintaining higher strength than standard alloys.

The geometry retains the original steel pivot ball seating and uses a curved profile around the joint to keep the pivot ball located during steering travel. As fixed-length components, these links control knuckle movement through the steering arc to deliver a steadier front-end feel on paved and mixed surfaces.

Packing includes

  • Front Steering Toe Links - 2pcs

Original Name / Part No:

9027

Compatible Models

  • TRAXXAS 1/8 JATO 4X4 VXL BRUSHLESS-90386-4
  • TRAXXAS 1/8 JATO 4X4 BRUSHLESS-90154-4

Use this matched pair when you need identical fixed-length links for the JATO 4X4 VXL steering layout; they are intended as direct front replacements that keep the factory pivot seating intact.

Yes, the links are supplied assembled as a fixed-length pair to match the front steering link locations on compatible JATO 4X4 VXL models and should install without additional machining.
Machined from 7075 aluminium with an anodized finish, the links offer good resistance to bending and surface wear, though they remain a lightweight upgrade rather than a sacrificial crash part.
The profile around the pivot ball seating is shaped to keep the steel ball in place through normal steering motions, keeping the link-to-knuckle interface secure.
The manufacturer supplies the set as fixed-length links measuring 98 mm overall with an 88 mm center-to-center dimension, confirmed for the listed JATO variants.

Copyright © 2008-2026 rcjaz.ca All rights reserved