TRAXXAS E-REVO Wheel Hex Claw +2mm with Brake Disk ER0062MM/4 by GPM  [ER0062MM/4]

Machined aluminium hex claw for E-REVO fitment

These machined aluminium wheel hex claws are made as a direct-fit upgrade for TRAXXAS E-REVO wheel mounting hardware. The +2mm offset and built-in brake disk help maintain wheel seating and reduce slippage when under drive loads.

Fitting is straightforward for experienced hobbyists: remove the stock hex, slide the aluminium claw onto the wheel hub, and tighten using the original hex screw pattern. Because the part moves the wheel outward by +2mm, check clearance with suspension arms and body mounts before final torque. Apply threadlocker to mating screws for heavy use and inspect wheel runout after installation to ensure proper seating.

For setup and tuning the aluminium claws provide a rigid metal interface compared with many stock plastic hexes, cutting down on relative movement that can allow the wheel to walk under torque. They are useful when you need consistent wheel position for brake adjustments or when running higher torque motor and ESC setups in scale practice or competition.

This ER0062MM/4 set from GPM provides a compact aluminium upgrade for E-REVO wheel mounting, delivering a +2mm offset and integrated brake disk to help keep wheels seated and limit slippage during running.