TRAXXAS Craniac On-road Setup Components CRAON1/10P by GPM  [CRAON1/10P]

TRAXXAS 1/10 Craniac Monster Truck TRAXXAS Craniac On-road set ting Component (Aluminium Wheels 10 Poles) - 1set Included: (Aluminium Front + Rear Dampers, Spring Steel Tie Rod, Aluminium Front Mount Holder & Tie Rod, Wheel Hex, Front + Rear Aluminiu
Price:
CAD$274.85
Brand:
GPM
Model:
CRAON1/10P
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Craniac on-road setup components overview

This aftermarket component set is supplied for the TRAXXAS 1/10 Craniac monster truck platform and groups aluminium and steel parts used to refine chassis setup and handling. The kit combines aluminium front and rear dampers, a spring steel tie rod, an aluminium front mount and tie rod, wheel hexes, and matched front and rear aluminium wheels with tyres in a single on-road setting package.

The parts are intended as scale hop-ups and practical replacements for worn stock items. Use the aluminium components where added stiffness benefits handling and the spring steel tie rod where controlled flex and fatigue resistance are needed. Installation requires basic RC tools and careful alignment; perform standard teardown and rebuild checks for the Craniac chassis.

Specifications

  • Item: TRAXXAS Craniac on-road setting component kit
  • Material: Aluminium, spring steel, rubber (tyres)
  • Model Number: CRAON1/10P
  • Compatibility: TRAXXAS 1/10 Craniac Monster Truck
  • Included Items: 1 set containing aluminium front and rear dampers, spring steel tie rod, aluminium front mount holder and tie rod, wheel hex, front and rear aluminium wheels and tyres

The CRAON1/10P set is supplied as an aftermarket package for setup adjustments and replacement on the TRAXXAS Craniac 1/10 chassis, ideal for hobbyists performing suspension and wheel changes during tuning sessions.

What parts come in the CRAON1/10P kit?

The kit is a single set containing aluminium front and rear dampers, a spring steel tie rod, aluminium front mount and tie rod, wheel hexes, and front and rear aluminium wheels fitted with tyres.

Will these fit other models?

Fitment is listed for the TRAXXAS 1/10 Craniac only; check mounting points and dimensions if you plan to adapt parts to a different chassis.

What tools do I need to install the kit?

Basic hex drivers, pliers and alignment tools are sufficient. Torque aluminium fasteners carefully and verify suspension geometry after assembly.

How should I look after the aluminium wheels and dampers?

Keep mating surfaces clean, inspect threads and surfaces for wear, and use appropriate anti-seize or thread locker where required. Replace any damaged parts to preserve setup accuracy.

Copyright © 2008-2026 rcjaz.ca All rights reserved