TRAXXAS Craniac Front Bumper Mount Aluminium CRA332F by GPM  [CRA332F]

TRAXXAS 1/10 Craniac Monster Truck Aluminium Front Bumper Mount - 1pc set - GPM CRA332F
Price:
CAD$30.77
Brand:
GPM
Model:
CRA332F
GTIN:
4894538128819
Condition:
Brand New
Write a review
alt="TRAXXAS 1/10 Craniac Monster Truck Aluminium Front Bumper Mount - 1pc set - GPM CRA332F" title="TRAXXAS 1/10 Craniac Monster Truck Aluminium Front Bumper Mount - 1pc set - GPM CRA332F"
alt="TRAXXAS 1/10 Craniac Monster Truck Aluminium Front Bumper Mount - 1pc set - GPM CRA332F" title="TRAXXAS 1/10 Craniac Monster Truck Aluminium Front Bumper Mount - 1pc set - GPM CRA332F"

Aluminium front mount for Craniac

This aluminium front bumper mount is an RC-scale replacement part made for TRAXXAS Craniac 1/10 monster truck owners who need a direct-fit front-end component. The single-piece unit is intended to restore or strengthen the vehicle's front attachment points after impacts, acting as a practical chassis-level upgrade rather than a cosmetic change.

Compatibility and role: the mount is designed to fit the 1/10 Craniac platform and uses the stock front mounting locations to preserve original alignment. It is a functional component for drivers who want predictable front-end behaviour and straightforward field repairs.

Installation notes: the part ships as a 1pcs set and installs with the existing mounting holes found on the Craniac chassis. Where possible reuse standard hardware from the original bumper, but confirm thread engagement and apply conservative torque to avoid overstressing the aluminium during assembly.

Specifications

  • Item: Front bumper mount, 1pcs
  • Material: Aluminium
  • Model Number: CRA332F
  • Compatibility: TRAXXAS 1/10 Craniac Monster Truck

Fit this mount to replace bent or broken front mounting hardware or to install a robust aluminium option that preserves the Craniac's front geometry for consistent off-road handling.

This item is compatible with

  • TRAXXAS CRANIAC

Will this mount use the stock bumper screws?

Yes. The mount is made to align with the original Craniac mounting holes so you can normally reuse the bumper screws and washers; replace any damaged fasteners before final tightening.

Does the aluminium part change ride geometry?

When fitted to the stock points it maintains the factory geometry, so steering and suspension setup should remain unchanged aside from increased front-end stiffness.

How durable is the mount after hard impacts?

Aluminium resists bending compared with plastic but inspect for cracks after heavy hits; minor deformations can be repaired or replaced as needed for safety and fit.

Any tips for installation torque?

Use moderate torque and check thread engagement. If threads feel loose consider using new hardware or thread locker to avoid stripping during repeated servicing.

Copyright © 2008-2026 rcjaz.ca All rights reserved