TRAXXAS Craniac 1/10 Front Body Post Mount with Delrin Post CRA201F by GPM  [CRA201F]

TRAXXAS 1/10 Craniac Monster Truck Aluminium Front Body Post Mount With Delrin Post - 1set - GPM CRA201F
Price:
CAD$29.37
Brand:
GPM
Model:
CRA201F
GTIN:
4894538098341
Condition:
Brand New
Write a review
alt="TRAXXAS 1/10 Craniac Monster Truck Aluminium Front Body Post Mount With Delrin Post - 1set - GPM CRA201F" title="TRAXXAS 1/10 Craniac Monster Truck Aluminium Front Body Post Mount With Delrin Post - 1set - GPM CRA201F"
alt="TRAXXAS 1/10 Craniac Monster Truck Aluminium Front Body Post Mount With Delrin Post - 1set - GPM CRA201F" title="TRAXXAS 1/10 Craniac Monster Truck Aluminium Front Body Post Mount With Delrin Post - 1set - GPM CRA201F"
alt="TRAXXAS 1/10 Craniac Monster Truck Aluminium Front Body Post Mount With Delrin Post - 1set - GPM CRA201F" title="TRAXXAS 1/10 Craniac Monster Truck Aluminium Front Body Post Mount With Delrin Post - 1set - GPM CRA201F"
alt="TRAXXAS 1/10 Craniac Monster Truck Aluminium Front Body Post Mount With Delrin Post - 1set - GPM CRA201F" title="TRAXXAS 1/10 Craniac Monster Truck Aluminium Front Body Post Mount With Delrin Post - 1set - GPM CRA201F"
alt="TRAXXAS 1/10 Craniac Monster Truck Aluminium Front Body Post Mount With Delrin Post - 1set - GPM CRA201F" title="TRAXXAS 1/10 Craniac Monster Truck Aluminium Front Body Post Mount With Delrin Post - 1set - GPM CRA201F"
alt="TRAXXAS 1/10 Craniac Monster Truck Aluminium Front Body Post Mount With Delrin Post - 1set - GPM CRA201F" title="TRAXXAS 1/10 Craniac Monster Truck Aluminium Front Body Post Mount With Delrin Post - 1set - GPM CRA201F"

Aluminium front body post for Craniac

This aluminium front body post mount is an aftermarket replacement crafted for the TRAXXAS 1/10 Craniac Monster Truck platform. It combines an aluminium mounting base with a Delrin post to keep the body seated firmly while allowing easy service access.

The mount is a practical upgrade that reduces front-end shell flex and helps the body stay in position through jumps and rough terrain. The Delrin post lines up with the body mounting holes while the aluminium base resists distortion when the truck is pushed hard.

Installation uses the same mounting footprint as the stock unit, fitting the existing chassis screw points and hardware. The design supports quick body removal and refit for setup changes or track-side adjustments, helping you dial in front-end fitment and limit unwanted body movement that can change airflow and handling.

Specifications

  • Item: Front body post mount set
  • Material: Aluminium base, Delrin post
  • Model Number: CRA201F
  • Compatibility: TRAXXAS 1/10 Craniac Monster Truck

A straightforward hop-up for drivers wanting a firmer front body attachment and a durable base that keeps alignment after heavy use and tuning sessions.

Can this fit other Traxxas bodies with similar mounting points?

This part is specified for the TRAXXAS 1/10 Craniac chassis; it may fit other models that share the same front post footprint but confirm hole spacing before fitting.

Do I need new screws to install it?

In most cases you can reuse the stock chassis screws since the mount uses the factory screw locations, though check thread engagement during installation.

Will the Delrin post wear the body mounting holes?

Delrin offers low friction and good wear resistance, so it helps preserve the shell holes while keeping a snug fit over repeated removals.

Any special care for the aluminium base after offroad use?

Rinse off mud and grit and inspect screw torque after hard runs; routine checks are all that is required to maintain fit and function.

Copyright © 2008-2026 rcjaz.ca All rights reserved