TRAXXAS 1/8 X-Maxx Drivetrain Gear Set Aluminium Adapter 55T Spur 17T Pinion TXM355517T by GPM  [TXM355517T]

TRAXXAS 1/8 X-Maxx Aluminium Gear Adapter+Steel Spur Gear 55T+Motor Gear 17T - 1set - GPM TXM355517T
Price:
CAD$84.30
Brand:
GPM
Model:
TXM355517T
GTIN:
4894538204520
Condition:
Brand New
Write a review
alt="TRAXXAS 1/8 X-Maxx Aluminium Gear Adapter+Steel Spur Gear 55T+Motor Gear 17T - 1set - GPM TXM355517T" title="TRAXXAS 1/8 X-Maxx Aluminium Gear Adapter+Steel Spur Gear 55T+Motor Gear 17T - 1set - GPM TXM355517T"
alt="TRAXXAS 1/8 X-Maxx Aluminium Gear Adapter+Steel Spur Gear 55T+Motor Gear 17T - 1set - GPM TXM355517T" title="TRAXXAS 1/8 X-Maxx Aluminium Gear Adapter+Steel Spur Gear 55T+Motor Gear 17T - 1set - GPM TXM355517T"
alt="TRAXXAS 1/8 X-Maxx Aluminium Gear Adapter+Steel Spur Gear 55T+Motor Gear 17T - 1set - GPM TXM355517T" title="TRAXXAS 1/8 X-Maxx Aluminium Gear Adapter+Steel Spur Gear 55T+Motor Gear 17T - 1set - GPM TXM355517T"
alt="TRAXXAS 1/8 X-Maxx Aluminium Gear Adapter+Steel Spur Gear 55T+Motor Gear 17T - 1set - GPM TXM355517T" title="TRAXXAS 1/8 X-Maxx Aluminium Gear Adapter+Steel Spur Gear 55T+Motor Gear 17T - 1set - GPM TXM355517T"
alt="TRAXXAS 1/8 X-Maxx Aluminium Gear Adapter+Steel Spur Gear 55T+Motor Gear 17T - 1set - GPM TXM355517T" title="TRAXXAS 1/8 X-Maxx Aluminium Gear Adapter+Steel Spur Gear 55T+Motor Gear 17T - 1set - GPM TXM355517T"

Overview for X-Maxx Drivetrain Parts

The TXM355517T kit supplies an aluminium gear adapter mated with a 55T steel spur and a 17T motor gear for TRAXXAS 1/8 X-Maxx vehicles. This mixed-material set positions the motor pinion correctly while giving a tougher steel surface on the large spur for improved wear resistance during regular use.

Functionally the adapter sets pinion mesh to the spur and the 17T pinion with the 55T spur creates a common ratio used across many X-Maxx setups. Model replacement, ratio swaps, or correcting mesh after maintenance are typical reasons to fit this set.

Installation tips: check pinion-to-spur mesh visually, secure the motor to the gearbox before final tightening, and re-check fasteners after an initial run. Keep backlash minimal and ensure the spur and pinion spin freely without side load on bearings.

Specifications

  • Item: Aluminium gear adapter with 55T steel spur and 17T motor gear, 1 set
  • Material: Aluminium adapter, steel spur, steel motor gear
  • Model Number: TXM355517T
  • Compatibility: TRAXXAS 1/8 X-Maxx

For X-Maxx owners replacing worn drivetrain parts or testing alternative gear ratios, this aluminium adapter plus steel spur and pinion set provides a straightforward swap designed for routine maintenance and setup adjustments.

Will this fit my X-Maxx without modification?

Confirm your stock spur tooth count and motor spline match the 55T spur and the 17T pinion in this kit before fitting; most standard X-Maxx gearboxes accept this combination directly.

How do I check gear mesh correctly?

Set motor pinion close to the spur, add a thin film of gear grease, then adjust until teeth contact evenly across their width without binding; tighten motor mount and re-test.

Should I inspect anything after the first runs?

After a short break-in run, inspect teeth for uneven wear or metal filings, verify fastener torque, and ensure bearings show no side load from misalignment.

Does changing to this spur and pinion affect performance?

The 17T/55T pairing sets a defined gear ratio; swapping to larger or smaller pinions will shift acceleration and top speed, so match ratios to your motor and ESC settings.

Copyright © 2008-2026 rcjaz.ca All rights reserved