Traxxas 1:10 GT4 TEC 2.0 Rear Aluminum Suspension Arms GT056 by GPM  [GT056]

TRAXXAS 4WD GT4 TEC 2.0 Aluminum Rear Suspension Arms - 4pc set - GPM GT056
Price:
CAD$30.77
Brand:
GPM
Model:
GT056
GTIN:
4894538289794
Condition:
Brand New
1 Reviews
Write a review
alt="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Rear Suspension Arms - 4pc set - GPM GT056" title="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Rear Suspension Arms - 4pc set - GPM GT056"
alt="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Rear Suspension Arms - 4pc set - GPM GT056" title="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Rear Suspension Arms - 4pc set - GPM GT056"
alt="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Rear Suspension Arms - 4pc set - GPM GT056" title="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Rear Suspension Arms - 4pc set - GPM GT056"
alt="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Rear Suspension Arms - 4pc set - GPM GT056" title="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Rear Suspension Arms - 4pc set - GPM GT056"
alt="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Rear Suspension Arms - 4pc set - GPM GT056" title="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Rear Suspension Arms - 4pc set - GPM GT056"
alt="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Rear Suspension Arms - 4pc set - GPM GT056" title="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Rear Suspension Arms - 4pc set - GPM GT056"
alt="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Rear Suspension Arms - 4pc set - GPM GT056" title="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Rear Suspension Arms - 4pc set - GPM GT056"
alt="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Rear Suspension Arms - 4pc set - GPM GT056" title="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Rear Suspension Arms - 4pc set - GPM GT056"
alt="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Rear Suspension Arms - 4pc set - GPM GT056" title="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Rear Suspension Arms - 4pc set - GPM GT056"

Machined rear suspension arms for Traxxas GT4 setups

This GPM GT056 rear suspension arm set is a direct replacement machined from aluminum 6061 T6 and finished with Delrin collars to minimise play at the damper pivots.

Multiple shock mounting holes let you fine tune roll behaviour and ride height without swapping shock bodies. The three dimensional machining profile trims excess bulk while improving chassis fit and pivot repeatability compared with stamped parts.

Supplied hardware includes two stainless steel round head screws 3x12 sized to secure the arms to the stock rear mounts. Check alignment at the chassis and confirm full suspension travel before final torque.

Packing includes

  • Stainless Steel Round Head Screws 3x12 - 2pcs

Compatible Models

  • Traxxas 1:10 4WD FORD GT4 + TEC 2.0 83056-4

Install these arms as a direct rear replacement on supported Traxxas GT4 TEC 2.0 chassis to tighten damper pivot fit and explore alternate shock angles during setup.

 

Product Reviews
1 Reviews
rating
Thank you very much for getting my package out so quickly. Getting it before the holidays is wonderful. Really great job folks. Thanks again. Jeff

What material and pivot hardware are used

The arms are machined from 6061 T6 aluminum and use Delrin collars at the pivot locations to reduce side play and noise.

Are the mounting screws provided

Yes, two stainless steel round head screws 3x12 are included to fasten the arms to the stock rear mounts.

Will these fit my GT4 without other changes

They are made to match the listed Traxxas mounting points, but we recommend a dry fit to confirm alignment and suspension clearance before final assembly.

How do the extra shock positions change handling

Changing shock holes alters leverage and roll centre geometry, giving you options to bias for quicker turn in or steadier midcorner grip.

Any checks before final torque

Verify the Delrin collars seat correctly, inspect for binding through full travel, and torque the screws evenly to a moderate setting.

Copyright © 2008-2026 rcjaz.ca All rights reserved